BTG is fuel-free. Free energy generator: diagrams, instructions, description. What is BTG

It is impossible to imagine the modern world without the use of electricity. Due to its widespread use, fuel-free generators are being developed and produced. The article explains what it is, where and how it is used, highlights the design features, and also contains instructions on how to make the device yourself. Attached are diagrams of different types of generators.

What is a fuel-free generator

This simple device is designed to generate electricity without the use of various types of fuel. It works on the principle of neodymium magnets. In a simple motor, the magnetic field is created by electric coils, usually made of copper or aluminum. These motors constantly require electrical power to create a magnetic field. The energy losses are colossal. But a fuel-free generator does not contain coils made of such materials. Therefore, losses will be minimal. It uses a constant magnetic field to create the necessary force to move the motor.

This concept of generating a magnetic field from permanent magnets only came into practical use with the introduction of neodymium magnets, which perform better at full power than previous ferrite magnets. The main advantage is that the device does not require constant power supply or recharging.

To find alternative ways to generate electricity, there are a number of alternatives from non-traditional energy sources that are also renewable. One such alternative is to generate electricity from a fuel-free engine in an isolated power generation system with low maintenance costs.

A fuel-free engine (like a generator) is an engine that generates electricity around the clock without fuel (gasoline, diesel, oil, gas, sun). The drive mechanism is a DC motor, which is driven by a battery (12V or more). The battery drives a DC motor, which in turn drives an alternator to generate electricity and at the same time, using a diode, charges the battery.

Energy sources that can operate without carbon dioxide include wind, waves, or photovoltaic and osmotic energy. But fuel-free power generators are still the most reliable sources of energy with low operating costs, even outperforming solar panels in some cases.

The use of low-cost traditional energy sources such as fuels will remain the main source of energy until the next decades, despite their adverse environmental impacts.

The use of a fuelless engine (or generator) for generating electricity is limited by the power of the DC motor and alternator. This implies that the presence of a DC motor and a high power generator gives the fuelless engine its capabilities. Research has shown that the fuel-free engine's worldwide potential is more than five times that of wind and solar because it operates 24/7, every day, anywhere on the planet.

Where and how is the BTG generator used?

There are many different ways to generate power from a fuel-free engine or generator. In every field, the use of this device will undoubtedly bring benefits. Below are brief descriptions of some of these areas.

On the roads

A fuel-free generator can easily replace diesel engines used in the vast majority of modern heavy vehicles, such as trucks, buses, trains, and large portable power engines. This list also includes most agricultural and quarry vehicles.

In the air

Both gasoline and diesel engines used in aircraft can be replaced with fuel-free electric generators.

On the water

Fuel-free generators can also serve as a replacement for the high-speed engines found on yachts, ships and lines along the high seas.

Underground

Fuelless engines and generators can also replace diesel engines, as well as engines used in mining operations around the world. Similarly, fuel-free devices are replacing engines that are used for mining and natural resources, such as various precious metals, iron ore, coal and associated petroleum gas.

In medical institutions

The devices can also replace emergency backup generators, which every large medical facility or hospital must have in place due to the presence of possible critical situations.

In data centers

Fuel-free generators can be used for computers, and also if the phone is not charging, the generator can serve as a good charger for a mobile device. When servers and systems go down, communications can be lost, work processes can stop, data can be lost, and even the entire work process can be stopped completely.

Fuel-free power generators can also be installed on the sides of a two-wheeler. This must be done in such a way that as the vehicle moves, the fan begins to rotate and generate additional energy.

When DC motors with a power of more than 500 hp. With. connected to an alternator whose power is lower than that of dc motors, the maximum power output of the alternator can be obtained.

Design Features

A simple fuel-free electric generator consists of a rotor and a stator.

The stator of the machine does not move and is usually the outer frame of the machine. The rotor can move freely and is usually located inside the machine. They are both typically composed of ferromagnetic materials. The slots are made along the inner periphery of the stator and the outer periphery of the rotor. The conductors are placed in the corresponding slots of the stator or rotor. They are connected to each other, forming round windings. The winding in which the voltage is induced is called the armature winding, and this is also the name given to the current transmitted through it. Permanent magnets are used in some machines to provide the main flux to the machine.

Steven Mark's TPU device is radically different from other fuel-free devices with its original design. Such a generator does not have radio frequency resonators. The working part of the device consists of a metal ring (diameter approximately 20 cm), onto which coils made of thick stranded wire are placed. The author demonstrated his invention in public more than once, but then the original development was strictly classified.

And yet, thanks to his followers, a new version was released - Ottp Ronette, which already had differences from the original version. She already had two plastic rings, to which a thick pair of wires was attached. The wires themselves were connected crosswise.

How to make a fuel-free generator with your own hands

There are two most common ways to make BTG with your own hands:

• wet;
• dry.

The wet method will require a battery, while the dry method will require batteries.

Wet method

Required components:

• charger of the required caliber;
• battery;
• amplifier;
• transformer for alternating current.

The battery serves as an energy storage device and also stores it. A transformer is needed to generate constant electrical current signals. The amplifier, in turn, increases the level of current supply, since the initial power of the battery is about 12 or 24 V. A charger will be needed for constant and uninterrupted operation of the device.

First you need to connect the transformer to a permanent network or to a battery, and then to a power amplifier. After which you will need to connect the sensor for expansion to the charger circuit. Then you need to connect the sensor back to the battery.

Dry method

The operating principle of a dry device is to use a capacitor.

To create such a device you need:

• transformer;
• generator prototype.

This method of manufacturing the device is the most optimal, since its service life can be at least 3-4 years without charging.

First of all, it is necessary to connect the transformer and the prototype using special conductors (non-damped). It is recommended to do this by welding to create the strongest possible connection. To check the work done, you need to use a dynatron.

BTG scheme:

A working diagram of how to make a BTG with your own hands:

Also today, new BTG schemes are being released, which provide for connection to several batteries and other generators.

The use of fuel-free generators is a modern, more economical and environmentally friendly solution, however, their manufacture and selection is a task that requires special attention and responsibility.

A fuel-free generator (hereinafter referred to as FTG) from a transformer is an idea that has captivated many inventors in the world, since the time of the famous N. Tesla. Unlike the mythical “perpetual motion machine,” such BTGs must receive a primary powerful energy impulse from the outside, and then, transforming it with the necessary circuit elements, receive the current/voltage necessary to drive motors or other consumers. There are several varieties of BTG based on a transformer with a short-circuit turn; let’s consider the most realistic designs.

General operating principles

The essence of all developed installations is to redirect the used part of the power back to the secondary circuit, losing a minimum of energy. The remaining part must be generated by a transformer.

The sequence of operation of such a BTG is as follows:

The initial power from the supply battery (for example, solar) is accumulated by a high-capacity capacitor.

Upon reaching a given potential difference, the capacitor is discharged and transmits an impulse to the primary winding of the transformer. As an intermediate link, a capacitive cascade of two parallel-connected diodes and a capacitor is used, which smoothes out the inevitable voltage ripples.

The power is sensed by an inductor, which is connected to the primary winding of the transformer. The secondary winding is a series-connected oscillating circuit and another inductor, in parallel with which a diode bridge operates. The purpose of the latter is to limit peak power values, which theoretically can reach infinity.

Part of the primary winding of the transformer is reserved for load, and part is connected to ground. This is necessary to limit the generated power and extend the life of the circuit elements.

To avoid spontaneous pulse discharge, all other elements of the circuit - the primary oscillating circuit, as well as the terminals of the primary and secondary windings of the transformer are grounded.

Thus, the energy consumed by the circuit is constant and sufficient to power the load - the local lighting system, as well as the drives of any small devices or devices. At the same time, due to the pulsed nature of the output voltage, the BTG on a transformer cannot be used to power DC motors.

Important! It should be taken into account that any external energy source - solar battery, magnets, etc. - does not differ in power regularity. Therefore, despite the absence of mechanical transmission systems, some of the energy will be dissipated in the circuits and lost due to the electrical resistance of the wires.

The free energy generating machine, invented by John Bedini, consists of the following components:

• Electromagnetic double-layer coil.
• A core of welding rods fastened together.
• Pairs of magnets.
• A rotor located above the core.
• The insulating base is a stand made of wood or plexiglass.
• Diode bridge with transistor and smoothing capacitor.

A load, one terminal of which is connected to the secondary circuit, and the second to the supplying external battery. The battery can be connected to an amplifier, then the power of the installation will increase.

The Bedini engine works like this. The double-layer coil is a conventional CE generator on a transformer with a short-circuit turn. In this case, the outer wire receives power from the battery, and the inner wire transmits power to the secondary circuit, thereby forming an electromagnetic field in the massive core (the stronger it is, the more massive the core, and the more turns in the primary winding). Rotating in an alternating magnetic field, this core forms the motor rotor. The transistor body is a collector, one of the poles of which is connected to the emitter. The second pole is connected to the secondary winding of the transformer. With sufficiently reliable insulation of the windings, all the energy generated by the rotating rotor will be directed to the load.

When assembling the Bedini engine circuit, you should adhere to the following mandatory rules:

Take care to securely fasten all parts of the composite core of the primary winding, since when the rotor rotates, some of the rods may become disconnected from each other and significantly weaken the magnetic field of the primary winding. It is recommended to glue the rods with super-resistant glue;

To monitor the parameters of the generated power, it is recommended to use a neon tracking lamp, which is connected in parallel to the emitter and collector. When the circuit is turned on, this lamp should not light up (threshold voltage 80...100 V); otherwise, the current in the secondary winding is too high, which will damage the transistor.

Batteries must be in full working order, fully charged and not leaking to the case, otherwise they may explode.

Fuel-free generator Kapanadze

This type of BTG can be collected in several varieties. Its basis (as in the Bedini engine) is a transformer with a low-voltage primary winding. The frequency of the current in the Kapanadze generator circuit can be changed, for which a corresponding switch is provided in the circuit. It is located near smoothing capacitors, of which there can be from one to three in the circuit (as the number increases, the amplitude of the current ripple decreases).

The parameters of the coil are not particularly important, since the current is stabilized by an inductor, like a Tesla generator.

Important! When a battery is connected to the circuit as an energy storage device, the current in the secondary winding of the transformer increases sharply to values ​​sufficient to power the load.

Depending on the initial requirements, the following versions of the Kanapadze BTG are known:

With an electromagnet and a transformer, with a total power of up to 15...20 W. The primary circuit must be designed for high voltage, while the voltage in the secondary circuit should not exceed 120 V. To stabilize the frequency, an inverter is connected to the secondary winding of the transformer. In order to monitor the operation of the circuit, the protective housing of the BTG is made of acrylic glass.

A generator with an electronic switch, for which a second step-down transformer is built into the circuit. The initial current frequency in this option is reduced and should not exceed 12 Hz. The rest of the circuit is identical to the previous one, with the exception of the inverter: it is designed for low electrical conductivity values.

BTG transformers are made of three parts, which requires a powerful electromagnet and a capacitor battery. The circuit provides more opportunities for branching the output energy flow. The conductivity of the inductor must be low, otherwise the frequency of the output current drops sharply. It is possible to increase the performance and reliability of such a BTG through the use of several inverters with frequency converters.

The general limitation for all types of BTG on transformers is increased requirements for electrical safety and relatively low power values.

The majority of people are convinced that energy for existence can only be obtained from gas, coal or oil. The atom is quite dangerous; the construction of hydroelectric power plants is a very labor-intensive and costly process. Scientists around the world say that natural fuel reserves may soon run out. What to do, where is the way out? Are humanity's days numbered?

All from nothing

Research into types of “green energy” has recently become more and more intense, as this is the way to the future. Our planet initially has everything for human life. You just need to be able to take it and use it for good. Do many scientists and amateurs create such devices? as a free energy generator. With their own hands, following the laws of physics and their own logic, they do something that will benefit all of humanity.

So what phenomena are we talking about? Here are a few of them:

• static or radiant natural electricity;
• use of permanent and neodymium magnets;
• obtaining heat from mechanical heaters;
• transformation of earth's energy and;
• implosion vortex engines;
• solar thermal pumps.

Each of these technologies uses a minimal initial pulse to release more energy.

Free energy with your own hands? To do this, you need to have a strong desire to change your life, a lot of patience, diligence, a little knowledge and, of course, the necessary tools and components.

Water instead of gasoline? What nonsense!

An engine running on alcohol will probably find more understanding than the idea of ​​​​the decomposition of water into oxygen and hydrogen molecules. After all, even in school textbooks it is said that this is a completely unprofitable way to obtain energy. However, there are already installations for hydrogen separation using ultra-efficient electrolysis. Moreover, the cost of the resulting gas is equal to the cost of cubic meters of water used in this process. It is equally important that electricity costs are also minimal.

Most likely, in the near future, along with electric vehicles, cars whose engines will run on hydrogen fuel will be driving along the roads of the world. An ultra-efficient electrolysis plant is not exactly a free energy generator. It is quite difficult to assemble it with your own hands. However, the method of continuous hydrogen production using this technology can be combined with methods for producing green energy, which will increase the overall efficiency of the process.

One of the undeservedly forgotten

Such devices do not require any maintenance at all. They are absolutely silent and do not pollute the atmosphere. One of the most famous developments in the field of environmental technologies is the principle of obtaining current from the ether according to the theory of N. Tesla. The device, consisting of two resonantly tuned transformer coils, is a grounded oscillating circuit. Initially, Tesla made a free energy generator with his own hands for the purpose of transmitting radio signals over long distances.

If we consider the surface layers of the Earth as a huge capacitor, then we can imagine them in the form of a single current-conducting plate. The second element in this system is the ionosphere (atmosphere) of the planet, saturated with cosmic rays (the so-called ether). Electrical charges of opposite polarities constantly flow through both of these “plates.” To “collect” currents from near space, you need to make a free energy generator with your own hands. 2013 was one of the most productive years in this direction. Everyone wants to enjoy free electricity.

How to make a free energy generator with your own hands

The circuit of N. Tesla's single-phase resonant device consists of the following blocks:

1. Two regular 12 V batteries.
2. with electrolytic capacitors.
3. A generator that sets the standard current frequency (50 Hz).
4. Current amplifier block directed to the output transformer.
5. Converter of low voltage (12 V) to high voltage (up to 3000 V).
6. A conventional transformer with a winding ratio of 1:100.
7. Step-up transformer with high-voltage winding and strip core, power up to 30 W.
8. Main transformer without core, with double winding.
9. A step-down transformer.
10. Ferrite rod for system grounding.

All installation blocks are connected according to the laws of physics. The system is configured experimentally.

Is all this really true?

It may seem that this is absurd, because another year when they tried to create a free energy generator with their own hands was 2014. The circuit described above simply uses the battery charge, according to many experimenters. The following can be objected to this. Energy enters the closed circuit of the system from the electric field of the output coils, which receive it from the high-voltage transformer due to their relative position. And the battery charge creates and maintains the electric field strength. All other energy comes from the environment.

Fuel-free device for obtaining free electricity

It is known that the appearance of a magnetic field in any engine is facilitated by ordinary wires made of copper or aluminum. To compensate for the inevitable losses due to the resistance of these materials, the engine must operate continuously, using part of the generated energy to maintain its own field. This significantly reduces the efficiency of the device.

In a transformer powered by neodymium magnets, there are no self-induction coils, and therefore there are no losses associated with resistance. When using constant ones, they are generated by a rotor rotating in this field.

How to make a small free energy generator with your own hands

The scheme used is as follows:

• take the cooler (fan) from the computer;
• remove 4 transformer coils from it;
• replace with small neodymium magnets;
• orient them in the original directions of the coils;
• By changing the position of the magnets, you can control the rotation speed of the motor, which operates completely without electricity.

This almost retains its functionality until one of the magnets is removed from the circuit. By connecting a light bulb to the device, you can illuminate the room for free. If you take a more powerful motor and magnets, the system can power not only a light bulb, but also other household electrical appliances.

About the operating principle of Tariel Kapanadze’s installation

This famous do-it-yourself free energy generator (25 kW, 100 kW) was assembled according to the principle described by Nikolo Tesla back in the last century. This resonant system is capable of producing a voltage many times greater than the initial impulse. It is important to understand that this is not a “perpetual motion machine”, but a machine for generating electricity from freely accessible natural sources.

To obtain a current of 50 Hz, 2 square-wave generators and power diodes are used. For grounding, a ferrite rod is used, which, in fact, closes the surface of the Earth to the charge of the atmosphere (ether, according to N. Tesla). Coaxial cable is used to supply high-power output voltage to the load.

In simple words, a do-it-yourself free energy generator (2014, T. Kapanadze’s circuit) receives only an initial impulse from a 12 V source. The device is capable of constantly supplying standard electrical appliances, heaters, lighting, and so on with normal voltage current.

A self-assembled free energy generator with self-powering is designed to close the circuit. Some craftsmen use this method to recharge the battery, which gives the initial impulse to the system. For your own safety, it is important to take into account the fact that the system output voltage is high. If you forget about caution, you can get a severe electric shock. Since a 25kW DIY free energy generator can bring both benefits and dangers.

Who needs all this?

Almost anyone familiar with the basic laws of physics from the school curriculum can make a free energy generator with their own hands. The power supply of your own home can be completely converted to environmentally friendly and affordable etheric energy. Using such technologies, transportation and production costs will be reduced. The atmosphere of our planet will become cleaner, the process of the “greenhouse effect” will stop.

Ecology of consumption. Science and technology: Fuel-free generators are gaining more and more popularity, thanks to the only, but very important advantage - the absence of fuel

Electricity generators are becoming increasingly popular every year not only among private users, but also in industry. This is directly related not only to savings in costs, but also to a reduction in the production of exhaustible minerals.

However, the most common fuel for them is still gasoline and diesel fuel. Their breakdown products are toxic and cause environmental pollution. Another thing is fuel-free generators, which have many advantages over their fuel counterparts. We'll find out what exactly they are next.

Saving mineral resources occupies a key place in the economy for many countries. This is successfully achieved through the use of fuel-free generators, whose operating principles are based on the elementary physical phenomena of magnetic induction current. Of the most successful and effective today, the following types of BG are used:

1. Dudyshev rotor - uses a magnetic current that is converted into an electrical impulse.
2. Minato magnetic motor has an increased efficiency of 100%, which is achieved through power amplifiers.
3. Johnson motor - has a compensator, but is not effective in industry due to low power.
4. The Adams generator is the most popular and efficient magnetic motor, which has a simple design but a high level of efficiency.
5. Dudyshev solenoidal motor - has an external magnetic rotor, which is effective only when using low powers (with a “wet” design).

Let's take a closer look at Adams generators, which are most often found on the market of alternative sources of electricity.

Fuel-free generators operate on the principle of generating free energy, converting it into induction current. Such great physicists as Adams (after whom the device is named) and Bedini devoted their research to this physical phenomenon. These units are widely used as an autonomous energy supply for private homes, as well as:

• in shipping;
• in the automotive industry;
• farm and forest land;
• in aircraft manufacturing and astronautics.

They are effective where there is no possibility of supplying fuel (diesel, gasoline, coke, gas, etc.), and natural energy (wind, solar energy, ebbs and flows) is not so powerful as to provide electricity at full capacity.

It is necessary to separate the concepts of “perpetual motion machine” and “energy generator of Adams memory”. They are similar in operation, but the latter require constant maintenance and periodic repairs.

Their operation does not depend on environmental factors, therefore the Vega fuel-free generator has the following features and advantages:

• Can be used away from any sources of electricity, as well as in open and closed areas, under the influence of precipitation.
• They use kinetic energy as fuel.
• They have no restrictions in operation and energy production.
• Does not have any negative effects on human health or the environment.
• The unit is quite compact and can be assembled independently if desired.
• Has a service life of at least 20 years.

The most important advantage of Vega generators is no need to impart constant movement to the generator shaft. This is done automatically by converting kinetic and electromagnetic energy into impulse.

The motor operates solely on the force of magnetic repulsion from the ends of the electromagnets. To do this, an induction field is created, which allows the production of an electrical impulse from magnetic oscillations.

The most primitive design of Adams generators contains the following elements:

• Generator - is a hermetically sealed cylindrical container, inside of which an electromagnetic field is created due to the influence of external coils.
• Voltage converter - generates electricity by converting magnetic pulses into alternating current.
• Rechargeable batteries – accumulate the received charge, allowing you to use it at any convenient time.

The main structural element is a gearless direct rotation generator, which is multi-pole in structure. Along its outer edge there are magnets, the number of which is selected individually, depending on the desired power. In the process of creating an electric field, the generator rotates around its axis, generating Efficiency no less than 91%. The generators are well connected to each other, which makes it possible to obtain autonomous power grids at absolutely no cost. This is beneficial in the case when the power of one generator does not exceed 5 kW, and at least 10 kW is required to fully provide electricity.

The operation of the generator under load is demonstrated in the video

Let's look at the example of creating an Adams-type generator, producing a small amount of power.

So, for work you will need:

• Magnets - their size will affect the induction field and the energy generated, so small pieces, preferably of the same size, are suitable for testing. For a full-fledged generator, 15 pieces will be enough.

The magnets must be installed towards each other with one pole - plus. Otherwise, the induction field will not be created.

• Copper wires.
• Two coils - you can either take it from ready-made motors or make it yourself by gradually winding two copper wires, starting from the bottom and moving up.
• Sheets of steel from which the body (frame) will be made.
• Nails, bolts and washers for securing small parts.

Let's get started. The first step is to attach the linear magnet to the base of the coil by drilling a hole and securing the latter with bolts. We wind wires (1.25 mm each) with insulation onto the coils. We install the coils on the metal frame so that there are gaps at the ends necessary for torsion of the main element. Actually, the unit is ready for use. Whether it was assembled correctly or not is very easy to check. To do this, you need to twist the magnets by hand, applying maximum force. If voltage appears at the ends of the winding (we check with a special device), then the unit is completely ready for operation.

Naturally, this circuit is primitive, but it reflects the essence of the idea - to create a generator that would operate without fuel, using the power of magnetic current. Such a generator is unlikely to be suitable for a home, but it will be quite possible to charge a mobile phone.

In the market of magnetic generator manufacturers, three leaders stand out significantly:

• "Vega";
• "Verano-Co";
• "U-Polemag";
• "Energystem".

"Vega"

The manufacturer produces generators that operate on the principle of magnetic induction, the idea of ​​which was brought into reality by the scientist physicist Adams. The cost of certain models depends entirely on the power output and dimensions of the unit. The price starts from 45,000 rubles. Among the obvious advantages are the following indicators:

• high level of environmental friendliness;
• silent operation, allowing the generator to be installed in a residential area;
• compactness;
• wide range of models from 1.5 to 10 kW.

Duration of work – at least 20 years. Operation and repair depends on the model. The most frequently replaced parts are batteries, which last for 3-5 years of use.

The operation of the generator is shown in the video

"Verano-Co"

Ukrainian manufacturer that uses high-quality components for its models. It is based on the production of generators of alternative energy sources, intended not only for domestic needs, but also for generating energy on an industrial scale. The operating principle is similar to all magnetic generators. The price range for the model range varies from 50,000 to 180,000 rubles.

"U-Polemag"

Chinese manufacturer, leader in the number and variety of models. Efficiency – 93%, with less than 1% energy loss. Compact dimensions and light weight are ideal for home use. The low level of noise and vibration allows you to keep it in the house without fear for your health. The equipment includes modern cooling systems that allow you to increase the service life up to 15 years. It is distinguished by its affordable prices, which on average range from 31,000 to 85,000 rubles.

"Energistem"

Engaged in the production of fuel-free vertical generators that operate on magnetic current. Many users of such units are dissatisfied, expressing somewhat contradictory opinions regarding the quality and power of the generators produced. The slightly inflated cost of 50,000 rubles and above makes this company last in the ranking of BTG manufacturers.

Any new generators (and magnetic ones even more so) cost a lot of money, so before buying one the question arises: how to buy a cheaper, but high-quality model? Recently, it has been fashionable to buy goods from China, which are famous for their cheapness and relatively tolerable quality. Generators or components for them can also be ordered abroad, but the risks are high:

As you can see, the savings are completely false. Another option is to purchase from the manufacturer. But even here there are some problems. Without knowing all the intricacies of the design and operating features of the unit, an experienced salesperson and marketer can “sell in” a generator that will not meet the requirements. It’s not for nothing that they say that if you’re armed, you’re protected! Therefore, before buying an induction magnetic generator, you need to:

The video shows a Vega Adams generator

This question is quite difficult to answer, because as many people there are as many opinions. Remember the main thing - the main task of an induction vertical fuel-free generator is to provide electricity with the power that is required. If the power is not enough, the generator can act as an auxiliary source of electricity. When choosing a model, the savings will not be justified, since cheap units are created from cheap materials that will not serve faithfully for ten years, as they should.

A generator, just like a car, is something everyone chooses for themselves, taking into account their personal preferences and requirements. The model, power, dimensions and other technical characteristics completely depend on where, how, when and for how long the fuel-free generator will be used. published

Generators that are capable of generating electricity without the use of gasoline or diesel fuel are becoming increasingly popular, as they are much more economical. Also, these devices do not emit toxic substances and do not pollute the environment. Magnetic generators that operate without fuel are used not only in households, but also in some industries.

Many states are now focusing on the development of alternative energy sources, as well as on saving mineral resources. This is achieved through the use of magnetic electric generators. The principle of their operation lies in the elementary laws of physics. The most successful types of devices are considered to be:

Most types of units can be successfully used in various industries. This will not only save on fuel, but also reduce the level of environmental pollution.

Vega device and its features

BTGs operate according to the scheme of capturing free energy, after which it is converted into an induction current. Adams and Bedini devoted their lives to studying this physical phenomenon. The devices can be used as an autonomous power supply for:

• private houses;
• farm or forest land;
• shipping;
• automotive industry;
• aircraft manufacturing and astronautics.

The effectiveness of fuel-free magnetic generators often manifests itself in places that cannot be supplied with fuel, and the strength of natural energy is not enough to fully provide electricity. It should be understood that Adams' device is not an eternal generator of electricity. During operation, it requires periodic repairs. The unit also requires constant maintenance.

The fuel-free magnetic generator from the manufacturer “Vega” has a number of advantages:

1. The device can be used in any weather conditions, as well as away from power supply networks.
2. The fuel is kinetic energy.
3. There are no restrictions on electricity production.
4. Completely safe for the human body and nature.
5. You can make a fuel-free generator with your own hands.
6. The unit is very compact.
7. The minimum service life is 20 years.

The main advantage is that you do not need to move the shaft yourself. The entire process is automated, thanks to the conversion of kinetic energy into electrical impulse.

Principle of operation

The operation of the generator is hybrid in the system. Alternating current is obtained after converting kinetic energy. The rotor rotates due to the force of the magnetic field that comes from the ends of the electromagnets. Thus, magnetic vibrations make it possible to create an electrical impulse. The simplest design contains:

The main element in the design is a multi-pole direct rotation generator. There are magnets on the outside. Their number depends on the required power. The minimum efficiency of such a device is 90%. From generators, you can create electrical networks by connecting several devices to each other. This is beneficial if the power of the device is, for example, 5 kilowatts, but the required power is 10 kilowatts.

Creating a device with your own hands

Obtaining electrical energy in huge quantities without consuming fuel is a tempting and quite feasible idea. The creation of such a device can be considered using the example of the Adams generator. For self-assembly you will need:

First, the magnet must be secured to the base of the coil. This can be done by drilling a hole in it and then securing it with bolts. The wires on the coils must be 1.25 mm thick and have a layer of insulation. The coils should be mounted on a metal frame so that there are small gaps between the ends. This is required for free rotation of the main element.

At this stage, the device can already be used. It is quite simple to check the correct assembly: you should manually turn the magnets. If the structure is assembled correctly, voltage will arise at the ends of the winding.

This is the most primitive generator, powered by magnets. But based on such a scheme, it is possible to create a device that will be able to provide electricity to the entire house. You can also purchase ready-made devices from trusted manufacturers.

Most popular models

Currently, the most popular generators are models from manufacturers Energistem, U-Polemag, Vega, and Verano-Co. They occupy a large part of the device market.

Vega produces devices that operate on the principle of magnetic induction. This idea was realized by the famous physicist Adams. The price often depends on the power and size of the device. The minimum cost is 45 thousand rubles. This manufacturer has a number of advantages:

1. Products from the Vega company are very environmentally friendly.
2. The generators are completely silent, which allows them to be installed anywhere.
3. The devices are relatively compact.
4. The manufacturer has quite a few models, the power of which starts from 1.5 kW and reaches up to 10 kW.

The minimum service life is 20 years. Batteries must be replaced every 3-4 years.

"Verano-Co" is a Ukrainian manufacturer that uses only high-quality components for its products. It produces generators for both domestic and industrial purposes. The operating principle of the alternative energy source is the same as that of other magnetic units. The cheapest model costs 50 thousand rubles. Prices for devices reach 200 thousand rubles.

U-Polemag is a Chinese manufacturer. Represents the largest variety of generator models. The standard efficiency of the devices is 93%. Maximum energy loss - 1%. Often purchased for household use. It has compact dimensions, low noise level and light weight. The package includes cooling systems. The maximum duration of use reaches 15 years. Prices for the model range start from 30 thousand rubles. and reach 90 thousand rubles.

Energizistem produces vertical devices. Consumers do not have a clear opinion about the quality and power of devices. Prices for generators are a little high and start at 50 thousand rubles.

Any such devices (especially magnetic generators) cost quite a lot. Often consumers want to buy a high-quality model, but at the same time spend a minimal amount of money. Recently, people have started purchasing goods from China. This is due to the fact that the products are cheap and have quite tolerable quality. Generators or structural elements can be purchased abroad, but there are certain risks that should be taken into account:

1. You have to pay for the product before receiving it.
2. It often happens that products do not correspond to the description on the website.
3. Sometimes the package does not reach the recipient, and no one will return the money.

Often such savings turn out to be false. It is possible to purchase a generator directly from the manufacturer. But with this option, you need to know all the intricacies of the device’s design so that an experienced seller cannot “sell in” a generator that does not meet the requirements, so before purchasing you should:

1. Thoroughly study the market for such devices. This will allow you to discover leaders among manufacturers.
2. Correctly calculate the power. This way you can save money without overpaying for unnecessary features.

It is advisable to make sure that a warranty card is issued for the product. Each model must have a test sheet which can confirm the quality.