Dantex multi-split systems Ideal for air conditioning or heating more than one room, and has all the functions of standard split system air conditioners. Dantex multi-split systems consist of several indoor units attached to one outdoor one. One compressor can service up to four indoor units, offering exceptional flexibility, cost-effectiveness, reliability and quality. Depending on the chosen model, there are restrictions on the number and power of available units. Dantex multi-split air conditioners can also be with inverter drive.
Today, Dantex inverter multi-split systems come in various combinations and configurations. Each indoor unit can operate independently. That is, ON/OFF, temperature, air movement up/down/left/right, operating hours, all can be controlled by wireless remote control. Each user has their own temperature control. This means that if someone likes 22 degrees and another likes 24 degrees, it's not a problem. Dantex multi-split systems offer a wide range of options to create comfort and style for many, which include air filtration and purification to improve indoor air quality.
Multi-split system Dantex (Dantex) buy
We offer a wide range of different models and sizes of Dantex multi-split systems. We have wall-mounted, ducted, cassette, and floor-mounted indoor units available to keep your home cool or warm. In addition, the outdoor unit is compact, quiet and can be located a few meters away from the indoor units.
Duct multi-split systems Dantex easily provides the supply of fresh air in the volumes necessary for thorough ventilation of the premises. Thus, the use of one Dantex semi-industrial duct air conditioner allows you to solve the problems of ventilation and air conditioning for an entire office, apartment, or cottage.
We will help you find the most the best Dantex multi-split systems tailored to your requirements and premises. Our team has a wealth of experience and knowledge that gives us the opportunity to discuss and help you with the choice of multi-split systems in various combinations; There are combinations to suit almost any need for both a small room and a large residence. For more information about multi-split systems, call the number provided.
Each Dantex multi split system consists of:
- One outdoor unit.
- Several internal modules. Up to 4.
The equipment is connected by highways. Into which the inert gas freon is pumped. Only one compressor is installed outdoors. Which reduces the noise level. Making the equipment suitable for maintaining the specified microclimate parameters. In a two, three, four-room apartment, or cottage.
The climate control devices produced by the brand share certain qualities. These are flexibility, efficiency, reliability and quality. They are available in various designs. Which can fit into any interior. We recommend models with inverter drive. They are more economical and reliable than their analogues.
Today the multi split system produced by Dantex equipped with a control panel. Allowing you to configure the indoor unit independently of others. You can adjust the air temperature, the direction of its supply, and the strength. It is possible to supplement the systems with air purification and filtration modules. She made them incredibly popular.
How to choose Dantex multi split?
Climate control equipment for several rooms is selected based on total power and functionality. An important criterion is the size of the apartment or house. Next you need to understand which modules you need. From us you can buy a wall-mounted, duct-mounted, cassette, or floor-standing indoor unit. Which will fit into the design.
If you are having difficulty selecting, please contact our managers. They will help determine the configuration. We are ready to install air conditioning equipment in your home. This will allow you to control the microclimate parameters in your home. Without spending a lot of money.
There are not many brands on the Russian market of climate control equipment that would meet the requirements of “simple, reliable, inexpensive” and could offer good quality at a reasonable price. The British brand “Dantex” is one of these, occupying the middle price segment (and for some models the cost can easily be called budget). The Dantex multisplit meets all the requirements for a modern climate system, does not cause maintenance problems, and is easy to install.
In the catalog of this brand you can find both fixed multi-splits and open-plan models. The first assume a standard configuration of the external unit with several internal ones (for example, 2 wall modules). The latter allow the buyer to independently equip the system with blocks of different types - floor-standing, cassette, duct - choosing which ones are best suited to the characteristics of the room.
Dantex multi-splits fixed configuration
The Dantex company produces several models of household multi-split systems with a ready-made kit - this is the VEGA MULTI series. Such air conditioners are convenient to use as home air conditioners; they include only two wall-mounted indoor modules and will be the best choice for an apartment, a summer house, or a small private cottage.
The power range for different models in this series ranges from 2.8 to 3.5 kW in cooling mode, which is quite enough to air condition residential premises with a total area of up to 35 sq.m. For work in the cold season there is protection against ice freezing and a warm start. But the manufacturer paid special attention to air quality - each multi-split Dantex VEGA MULTI series is characterized by a carbon and nano-fine filter. There are also deodorizing filters to get rid of unwanted odors.
Dantex multi-systems of free configuration
Dantex stacked climate systems allow you to equip one outdoor unit with a variety of indoor modules (of course, within the permissible power limits). A set of blocks of different types allows you to more accurately meet the needs of the buyer. This will be especially useful if you need to install an air conditioner in office premises, where it is convenient to place a cassette unit in one office, and, for example, a floor-ceiling unit in another.
Universal external Dantex units Available with power up to 10.5 kW. According to the company's official website, today the top seller is the HME inverter series, which allows the connection of 2 to 9 internal modules. These are fairly quiet units with high performance and class A energy efficiency. They belong to the category of environmentally friendly air conditioners, since they are designed to be charged with R410A freon.
Dantex multi-split indoor units Available in four types:
- cassette series Q4-A,
- channel series TZ,
- floor-ceiling series DL,
- wall modules (for example, RK-M07-12CC series).
Modern indoor units for Dantex multi-splits, regardless of type, are produced with inverter technology. But if necessary, you can also buy a regular non-inverter model - according to reviews, they are also highly reliable in operation, although not so economical in terms of energy consumption.
If desired, it is possible to install a free-range air conditioner using all of the specified types of units. In our LKG online store you will find a large selection of Dantex climate control equipment to solve any, even the most complex air conditioning problems. All equipment is sold with delivery throughout Moscow and Russia!
A multi-split system is equipment designed for indoor air conditioning, consisting of three or more units (outdoor and several indoor), which are connected to each other by copper pipelines and form a closed system for producing artificial cold. The outdoor unit has special ports (inlet and outlet) where pipelines for each indoor unit are connected. In some information sources, such a system is called multi-split systems with dial or variable capacity.
Often the names of a multi-zone system are confused with the name of a multi-split system. This is a gross mistake, since the composition, principle of operation, installation work, etc. fundamentally different from each other.
Large companies engaged in the sale of climate control equipment have in their assortment a type of split system, which consists of several units (outdoor and from two to five indoor). It would be correct to call such equipment a multi-split system. In this case, indoor units can be selected individually for each room. They can be all wall-mounted, all cassette, all channel, all console, etc., and they can also be all different.
The parameters by which these blocks are selected are: the performance of each indoor unit required to compensate for heat inflows in a given room. Since all such multi-split systems are inverter, the performance of the indoor units allows you to make deviations in the direction of decreasing or increasing this performance, based on the number of connected units and their location. Therefore, each company offers block coordination tables for each external unit, various options for connecting internal units, depending on their number, performance and type.
Installation work, principle of operation, components, operating procedure of the external and internal units remain the same, as for a conventional inverter split system. As mentioned earlier, the outdoor unit has connection ports for incoming and outgoing piping. Almost all functional elements of the refrigeration circuit are located in the external unit, including the main source of noise - the compressor. All models of multi-split systems have one compressor.
Complete set with typesetting system
The standard package of the system includes an individual control panel for each indoor unit. Depending on the type of unit, the remote control may be infrared wireless or wall-mounted wired, but, in any case, the control panel can be changed as an additional option.
Such a multi-split system has many advantages, let’s note the main ones:
- With one external unit, you can provide cold/heat to at least 5 independent rooms. If desired, you can have more than five rooms if you install ducted external units and distribute air ducts into several rooms;
- since all such systems are inverter, then, accordingly, they are efficient, durable and economical;
- wide possibility of choosing the type of indoor unit;
- compact;
- when installing one external unit, the external architectural features of the building can be preserved.
- higher price compared to conventional split systems.
Equipment with fixed system
There is a false idea that it is cheaper to install a multi-split system than to install a conventional split system for each room. This is not true. Perhaps that is why, in order to save money, they came up with a separate split system with two internal units and one external one, specifically for two rooms. Such a split system can also be called multi, and, in some cases, it is called a multi split system with fixed capacity. In fact, these are two ordinary split systems, they simply placed two external units in one external unit, and they are united by a single housing. There are two compressors inside, each of which supplies refrigerant to its own independent circuit. If one compressor breaks down, the refrigeration circuit it serves will cease to function, but the other will continue to function.
The standard package of the system includes an infrared wireless individual control panel for each indoor unit.
Disadvantages can be considered:
- Unlike a multi-split system with dial-in capacity, the manufacturer itself synchronizes the performance of the external and internal units, and it is impossible to replace them with higher or lower capacity;
- the location of the indoor units is wall-mounted only, which is not always convenient to fit into the overall structure of the room;
- if the number of rooms is more than two, all the advantages of the system are lost;
- short length of freon pipeline routes and height difference between the external and internal units;
- servicing only neighboring premises;
- Additional installation of wired control panels is not possible.
By price (ascending) By price (descending)
PICTURES LIST
Dantex multi-split systems are equipment with a wide range of functions and simple controls. The manufacturer makes equipment that creates comfortable conditions in any room and in any weather. This air conditioning system consists of several blocks: one external and several internal. Multisystems are ideal for rooms where it is impossible to place a large number of blocks on the facade.
Indoor units can be installed in different rooms and maintain the set temperature there independently of each other. Also, each individual system has its own remote control. You can select a unit of different power for each individual room.
Advantages of Dantex multi split systems
Split systems from Dantex are characterized by the following positive qualities:
use of the best components to ensure trouble-free operation;
control at all stages of production, resulting in a reliable product;
the ability to operate the split system even in any climatic conditions;
quick change of temperature in a room of any size;
minimal energy consumption;
safe operation even during sudden power changes;
profitable price.
Our prices for Dantex multi-split systems are lower than those of other companies. All products are provided with a quality guarantee. Buying Dantex multi-split systems from us is very simple: to do this, you need to fill out an online application on the website or call us by phone. A virtual catalog containing all models will help you choose equipment. Orders are processed quickly, delivery is carried out on time, so very soon you will be able to enjoy all the benefits that climate control equipment provides from our online store.
