Decorating frames. Unusual DIY photo frame decor ideas. Photo frame from other improvised means

It's always nice to look at photographs that capture memorable moments from your life. Be it a wedding celebration, the birth of a child, or just a photo on a bench in an autumn park.

And in order to prevent valuable shots from disappearing, we try to carefully preserve them; a photo frame may be suitable for this. You can buy it in a store, but making it yourself is much nicer.

Recommendations for making a photo frame with your own hands

In order to make a frame you do not need expensive materials; most likely, you have everything you need at home.

Initially, you need to decide what the base of the frame will be made of.

Suitable for this:

Paper colored or plain;
Durable cardboard;
Fibreboard, wood, etc.

For those needlewomen who have more experience, it will not be difficult to make a base for a photo frame from an old watch case, a box of matches, branches, twigs, plastic forks or spoons, and disks.

The greater the variety of available materials, the more interesting the work will be. The most popular materials are wood and cardboard.

Paper photo frame

If you have wallpaper scraps on hand, they can serve as a good basis for making a three-dimensional photo frame. Plain colored paper is also suitable, which, if desired, can be painted in the color you need.

Newspaper can also work for this. Using knitting needles, twist it into a tube, weave a frame, then form a frame and paint it with bright colors.

Cardboard photo frame

Cardboard will serve as the most reliable base for a photo frame. Draw out template details for the future frame. If you plan to hang the photo frame on the wall, attach a small loop made of thick thread to the back wall.

If you want to admire a photo on your desktop, step it up. Decorate the cardboard with flowers, stars, hearts, butterflies, which are prepared in advance from multi-colored paper.

Do not forget that excess design may look unsightly. If the paper contains a beautiful design, then there is no need to add decorations.

Wooden photo frame

If you decide to make a wooden frame, then for this you will need twigs and branches. First, think about what size the photo frame will be, because the width and length of the source material will depend on this.

The fastening element will be organza or rope. The work will not take much time, and the manufacturing process will be entertaining and interesting.

Weaving from willow, willow or vine branches requires certain skills, so this work is not for everyone.

An excellent material for a photo frame can be ice cream sticks. With their help you can create your own unique creative masterpiece.

Photo frame from other improvised means

Save colorful cards, they are great for decoration. Master the quilling technique and your bright works will delight you for a long time.

Note!

You can also use multi-colored napkins, cut them into small squares, twist them into small balls, and attach them to the base with glue. This work is not difficult, but even a child can do it painstakingly.

Various pieces of fabric are also suitable for decoration. For example, if you decorate a cardboard frame with denim, it will look very stylish and creative.

You can also attach puff pastry figures to the photo frame. Unnecessary markers, plastic tubes, pencils, fragments from a broken vase, disks and much more can be used for decoration.

Natural materials (dry leaves, flowers, pine cones, nut shells, wood shavings, multi-colored small stones, shells) look more natural and natural; they are perfect for decorating photo frames.

Experiment with food items, decorate the frame with rice, buckwheat, peas, beans, corn or sunflower seeds.

Use pasta (corns, stars, vermicelli or spaghetti) when decorating. To make the frame look more colorful, you need to paint it with colored paints.

Note!

From everything that has been said, we can conclude that in order for the photo frame to turn out beautiful and unique, for this you will need any available material, your imagination, idea and desire.

DIY photo frames

Note!

Perhaps you have a lot of photographs that you want to put in a beautiful frame. But spectacular and unusual options are not cheap, and finding a truly original model is not at all easy.

The solution is obvious - to decorate the photo frame with your own hands; our new selection of 12 express tutorials is dedicated to this topic.

By the way, using the same technologies you can create decor for a mirror frame that seems too banal to you.

What do you need for creativity, besides a regular frame? The simplest elements are eco-decor (an excellent frame for vacation photos), leftover fabric and braid, and, if desired, more unusual materials.

Find out right now how to turn a standard photo frame into a designer item with an original design!

__________________________

Photo frame in eco-style - 5 decor options.

1. Memories of the sea.

The easiest way to freshen up banal photo frames is to cover them with pebbles.

Pebbles can be painted, alternated in size - whatever you want. Ideal for vacation photos and any nautical themed decor.

2. Golden nuts.

If your cards or sweet little things need a special design, you will certainly like this method. The frame is interesting because it is made from... nuts.

You will need walnut shells and gold spray paint. Lay out the shells on paper and spray with paint. When dry, glue the decor to the frame. Magically!

3. Eco-style in miniature.

Here is another interesting decor option made from the gifts of nature. To do this, you will need the simplest materials: eggshells, small shells, small twigs.

Prepare them accordingly - break the shells, paint the branches white. And then frame them. By the way, it is not necessary to insert a photograph or painting into the center - there can also be thematic decor: leaves, large shells...

4. Seasoning for decor.

The frame can not only look beautiful, but also smell good.

To make this fragrant decoration, buy anise stars and glue them to the frame. Quantity and composition are at your discretion.

5. Birch bark frame.

Quite an unusual and therefore effective material (can be purchased from florists). Cut the birch bark into five strips. Four will be the frame, the fifth will be the stand.

Glue a photo onto the green cardboard (from the front part) (black and white is better, it looks more impressive). Glue the frame and backdrop, glue heart-shaped buttons onto the birch bark. Attach the stand - and the original frame is ready!

Do you want to stay in touch with us every day? Welcome to our Planet of Inspiration VKontakte! Take a look, scroll through! Like? Join and get inspired every day!

__________________________

How to decorate a photo frame with leftover ribbon.

6. Vintage charm.

The technology is simple: the frame is painted purple, then a lace braid is glued to it, and buttons of different sizes are glued to the corners. Very elegant!

7. Interesting spirals.

Spirals in different shades of green will transform even the most boring frame. To make them, you will need a twisted cord and double-sided tape.

Place the end of the cord on the adhesive layer and gradually twist the spiral. When all the spirals are ready, glue them with the other side of the tape onto the frame.

8. From braid with pompoms.

Making this kind of frame decor couldn’t be easier. You will need pompom ribbon (white or the same color as the frame) and clear spray adhesive.

Glue the tape around the edges of the frame, close the inside and spray glue. After drying, the braid will become rigid and the pompoms will not bunch up when the frame is in a vertical position.

__________________________

What decor can you come up with from other leftovers? Check out a couple of original ideas.

9. From old jeans.

Don't throw away your old jeans - you can make a lot of interesting things out of them. For example, original decor for a photo frame or mirror frame. To dress up the frame as a new item, you will need to cut the jeans at the seams into pieces of the desired size.

Choose the perfect placement, then apply fabric glue to the frame and get creative! Press the fabric down for better adhesion and wait until it dries, then glue a small piece of twine around the center section. This method is good because it is equally suitable for both large and small frames.

We also talked about this in a special issue with 50 photos for inspiration.

10. Graceful petals.

It's hard to believe, but this frame is made from... paper towel rolls. In total you will need 15 rollers.

Compact them, cut them into pieces of 2.5 cm, cover the inside with acrylic paint of different colors. Glue it in the shape of a flower, attach a photo and hang it on the wall.

__________________________

And a couple more interesting decoration ideas for photo frames.

11. Delicate flowers.

Making such airy paper flowers is not at all difficult. Cut out several circles from tissue paper and give them the shape of a flower.

Then connect two or three, glue the middle - and decorate the frame. The ideal base is a rustic frame made of untreated wood.

12. Decor made of sealing wax.

From a postal attribute, this simple material has turned into an original decor. You will need sealing wax of different colors and a stamp.

Melt the sealing wax over the fire until liquid (the mass should not boil), and then make several impressions on the frame. The composition will be completed with packaging twine tied in a bow.

We have described 12 ways to decorate a photo frame with your own hands, and you are convinced that it is very easy. We wish you pleasant creativity and excellent results!

Good afternoon, dear readers!

I would like to invite you to make creative DIY photo frames.

I remember the times when my grandmother had her whole room covered with photographs. She didn’t keep them in albums, but hung them on the walls and loved to show us these photographs and tell us about them. It was very interesting.

It’s also nice to sometimes look through albums with photographs, immerse yourself in memories, and share your impressions with friends.

Nowadays we store our photos on computers and not only our friends on social networks can see them! Whether this is good or bad, I don’t know.

But I'm absolutely sure that photographs can. You just need to select a few photos from old albums or print fresh photos with the most memorable events and make photo frames with your own hands.

DIY photo frames

Photos in frames can be placed on the table or hung on the wall vertically, horizontally, or collect several large and small photos, placing them in the most random order.

Yvonne Schroeder came up with a very interesting solution for decorating the interior and exterior corners of rooms with both color and black and white photographs. Take it into service! (Photo above)

If you have ready-made frames, albeit of different sizes and colors, made from different materials, completely outdated and unsightly, then this is exactly what we need!

Let's paint all the frames in one bright color - that's the new look of our interior!

If there are no frames, we will make them ourselves.

What can you make a photo frame from?

Suitable materials include plywood, fiberboard or cardboard. I don’t know if there’s a piece of plywood or fiberboard at home, but it’s probably easy to find cardboard, because we often have boxes of shoes and household appliances left over. Well, if you don’t have any old boxes, because you’re a neat freak and immediately throw away everything you don’t need, then you’ll have to buy the material in the store.

How to make a photo frame with your own hands

Nothing could be easier! From plywood, fiberboard or cardboard, we cut out the back part of the frame of the size we need and horizontal and vertical strips that need to be glued along the perimeter of the back part of the frame (do not forget to leave the top part unglued so that you can insert a photo). The front side of the cardboard photo frame can be cut out as one piece.

You can watch a detailed master class.

A frame with a photo can be hung on the wall using a loop, bracket, or hook that needs to be glued to the back of the frame. Another fastening option is twine or braid glued between the back and front sides of the frame.

We decorate the front side of the frame, and here we give free rein to our imagination.

How to decorate a photo frame

You can decoupage or paste over, decorate with bows, flowers, lace and beads, shells and even.

I have collected several creative ideas for decorating photo frames with your own hands from various Internet sources.

DIY photo frames: photo

I love all these original photo frames, and most of all the frames decorated with lentils painted in different colors. In this way, you can decorate photo frames with your own hands and coffee beans, corn, and buckwheat. You need to apply glue to the frame in parts so that it does not dry out, and pour grains onto the surface coated with glue, pressing them with your fingers.

Frames decorated with pieces of old CDs look very interesting. (source - http://www.bloglovin.com/).

Make photo frames for children together with your kids, for example, from Legos. How cute does a child’s photo frame look, inserted into a child’s drawing!

Of course, the photo frame was made from pencils by an adult. First, we cut the pencils to the desired size, sharpen them and glue them to the front side of a cardboard photo frame (source - http://www.alittletipsy.com/)

Old wooden frames can also be updated, not only by painting: wrapped with twine or thread, covered with burlap or wrapped in... a card! (source - http://alyssabyoung.com/).

Especially lately I like different crafts made from twine. Recently I knitted this for small items.

Another interesting idea is a photo panel made from matchboxes!

You will need quite a lot of boxes. The inner parts of the boxes need to be glued together in rows; in the outer rows, the boxes must be glued completely.

Then cut out the walls of individual boxes. Glue the structure onto a sheet of cardboard. Paint the upper front part, after drying, decorate with lace and flowers (source - delatsami.com/masterilka).

Photographs are a repository of a variety of moments. They preserve life itself. That is why, even in the era of digital technology, people always put on the table, place on the walls photos related to a particular event or person. Spectacular and unusual photo frames are not cheap, but everyone wants to decorate their home with a noticeable decorative element. Therefore, the decor of photo frames has always been, is and will be in demand. Decorating frames with your own hands is possible for almost everyone; it is exciting and makes you feel like a real creator.

Paper photo frames

How many things can you make from paper? Countless products, interior items, crafts and much, much more. The Internet is teeming with ideas, each better than the next.

Photo frame using origami technique

Necessary materials:
- colored single-sided paper;
- scissors;
- a simple pencil;
- PVA glue;
-ruler.

Base - 4 squares 15x15 cm.

Fold the square diagonally with the colored side facing inward.

Expand. Place the square face up and fold the bottom side of the square towards the fold line as shown in the photo.

Turn the workpiece over and bend the bottom corner.

Turn the workpiece over to the front side and bend along the fold line.

Turn over. And fold the bottom part along the fold line.

Place the side in the pocket. The module is ready.

Reverse side of the module.

To assemble a photo frame we need 4 modules.

Apply glue to a sharp corner and insert it into the corner of the 2nd module, as shown in the photo.

Then the 3rd and 4th module.

The photo frame is ready.

Reverse side of the photo frame.

Insert any photo or funny picture.

Volumetric photo frame

The good thing about this frame is that all you need to create it is a piece of paper and scissors. What’s also great is that the frame is voluminous.

The size of the frame depends on the size of the sheet of paper. This means that you can make a frame of any format. And use it to post a photo or collage, as well as to decorate handmade crafts.

Print the frame template

If you don't have the opportunity to make a printout, then make a template for a homemade paper frame with your own hands. To do this, you need to place a photograph in the center of the sheet and trace its outline (or simply draw a rectangle of the appropriate size in the center of the paper). Then set aside strips of different sizes (alternating strips 1.5 cm and 1 cm wide). Make indentations at the top and bottom as shown in the template.

Next, we bend the drawn strips along the ruler. We begin to wrap the sides of the future paper photo frame. We do this carefully so as not to crush the craft.

The short sides are folded first, followed by the long ones. We need to insert the corners of the long sides of the paper frame into the corners of its short sides to secure the structure tightly.

If the paper is very thick and glossy, it makes sense to insert the photo first, and only then fold the sides. This way it will “sit” tighter. If you are worried about the design, you can drop a little glue or use double-sided tape.

Paper frame using quilling technique

Option 1:

For work you need to prepare tools and materials:

photo frame made of light wood.
acrylic paint white
sponge or sponge for applying paint
quilling paper white and blue - strips 3 mm wide
tweezers for quilling
quilling awl
scissors
PVA glue
glue Moment
acrylic contours - imitation pearls - white and blue colors

Let's start by preparing the frame. It is better to take a frame made of light wood. Then you don’t need to prime the frame first, and the white paint will fit perfectly on the wood. If the frame is made of dark wood, you will need to apply primer first to disguise the dark color of the wood.
We remove the glass from the frame. Using a sponge, apply paint to the frame on all sides using a blotting motion. It is better to apply 2-3 layers. And leave the frame until completely dry (after 1.5 hours the frame will be completely dry).

While the frame is drying, we will prepare the decorative elements with which the frame will later be decorated. Let me immediately note that when creating such elements there are no uniform schemes or rules. All this is purely a flight of fancy and mastery of working with paper.
We take 8 strips of white color and glue them together with a ladder, that is, each strip is glued to the previous one with its tip, while the tip of the strip is located slightly lower.

Using an awl, we twist the glued strips, while wrapping the strip so that the gluing points are inside.

Unravel the twisted roll. This is such a beautiful curl.

Now we glue all the strips together in one place, just below the curl.

When the joint is dry, we give the strips a wave shape and glue the strips together again.

We cut off the remaining free ends so that each strip is longer than the other.

And twist each end.

Please note that this is a large complex element. Now we glue this element to the already dried frame. The element can be bent to fit the frame.

In the decor of this frame, I wanted to play up 2 colors - white and blue, as well as a smooth transition from one color to another, so let's start creating a central element, but in blue.
We glue 6 strips of paper together with a ladder and roll them into a roll.

Glue the strips together in one place. We cut the ends in the same way as the white element: each strip is longer than the previous one.

And we wind each strip onto a quilling awl.

Now we unwind the previously twisted rollers. This is easy to do by running an awl over them.

Now we glue this element to the frame. It is better to use instant glue for this. At the same time, we glue this element in the upper left corner, as in the photo.

We straighten the curls so that they lie in the same plane and glue them.

In order to make a smooth transition from one color to another, we glue strips of white and blue, 4 of each color. And twist it into a curl.

Glue it to the left side of the frame.

To fill the voids, we make and glue curls to the frame. Left - white, right - blue.

Add another blue curl, but this time larger.

Now let's go back to the bottom of the frame. For decoration we twist a lot of small curls. To do this, cut the strip into pieces of arbitrary size and twist the ends.

We glue the elements so as to fill the entire space.

I always encourage people not to be afraid to combine different techniques, and in this case I used acrylic outlines for painting. Using an outline with imitation pearls of a natural color, we place a series of dots. The size of the dots increases, from smaller to larger.

In the upper part of the frame, where the swirls are blue, draw dots with a contour of a suitable shade.

I drew wavy lines so that one color of the dots smoothly transitions into another.

And here is the result.

Place your favorite photo in a frame and let it please your eyes for many years to come.

Option 2:

To make a quilling photo frame you will need the following ingredients:

Thick paper for background (minimum 300g/m2)
- less dense paper for flowers (from 120 to 160 grams/m2 - denser is not advisable, because strips of this size will not curl so obediently and smoothly) in two colors. In my case, this is white, which will stand out, and a more subtle shade of the background color, which will allow our flowers to blend better with the main color and help highlight the details.
- a paper knife and a steel ruler for cutting strips. Cutting with scissors is a tedious task.
- PVA glue
- a toothpick or other device for twisting rolls

We cut strips 30 cm long and 5 mm wide, and estimate the quantity based on the plot we have planned. There are many clever ways to cut quickly, such as cutting multiple layers of paper at once, but at this density (120 to 160) it is quite difficult. Therefore, in order not to be too tricky for a long time, I fastened the paper for the flowers with a notebook sheet in a cage and, Whack-Whack-Whack, moving the ruler across the cells, but first we’ll make a frame, and the best part will be for later.

We mark our densest leaf. I recommend that you first draw up a detailed diagram on paper so as not to cut off too much and take into account all the dimensions. I was counting on a 13x18 photo, based on these dimensions we choose the width of the frame, mine on the left and bottom is a little wider. Having finished marking, we cut out a window for the photo, which should be slightly smaller than the photo itself.

Now let's take care of the “pocket” into which the photo will be inserted. Photo paper is very thick and has a significant thickness, so to prevent the frame from deforming when a photo is inserted into it, we will give the pocket a little width. We glue a narrow strip of thick paper on the back side, and now we can glue the “pocket” itself, which will prevent our photo from falling out of the frame.

The base is ready

Let's move on to the flowers. So, to make a petal we need a strip of paper, which, using a split toothpick (or a more noble tool), is rolled into a tight roll. The roll, in turn, is unrolled to a certain diameter, then the end of the strip is fixed with PVA glue and the roll is given the desired shape using your fingers. We wash our hands so that there are no offensive dark spots at work later. The sections of the strips get dirty especially easily; for white paper this is simply a disaster; it can easily give it a very poor appearance.

To make identical petals, it is convenient to use a template to unwind the rolls to the same diameter.

I also really like flowers of this shape.

And leaves, of course

In general, we twist as much as we like, don’t forget to create flora of various sizes.
When the main elements are ready, we place them on the frame and glue them. This is not the final version, but I think the meaning is clear.

Now we add details until the composition seems complete enough.

The last step remains - attach a stand to the back for stability.

The frame is ready!

Photo frame made of paper tubes

Option 1:

We will need:

old newspapers or magazines;
base frame;
glue;
wooden skewer;
scissors.

Before making a frame from newspaper, you need to prepare several dozen tubes. To do this, divide the printed publication into separate sheets, and then, starting from the corner, wind each sheet onto a wooden skewer.

To secure the tube, coat the corner of the sheet with a small amount of glue. Wait until it dries and carefully remove the skewer. Make several dozen more paper tubes in the same way. In our example, about 55 such tubes will be required.

Check if the tubes are long enough to cover the frame. If they turn out shorter than required, glue two tubes together by inserting one into the other. Now you can start creating a frame from newspaper tubes. Apply a thin layer of glue to the base frame. You can use a primer if the base color doesn't suit you.

Glue together four tubes into a rectangular frame, the size of which corresponds to the photograph or painting you plan to display. Carefully remove the ends of the tubes protruding beyond the edges of the frame, and the craft is ready!

Option 2:

We cut strips along the entire length of the sheet, i.e. 30 cm. Strip width 5 cm.

It is better to use glue that is not liquid. And you will need a wooden stick. We place the stick so that the ends of the strips remain empty, mine are 5 cm. Twisting a tube in this way is not as easy as it seemed to me at first, and I came up with my own method, which I share with you.

First step. First we make a side in the shape of a stick. This makes it easier to glue it on later. If you don’t have such sticks on hand, you can replace them with paper tubes. Which are twisted for weaving. For us, the main goal is a frame made of straight tubes (no twists).

Step 2. Rub the stick with pencil glue on all sides and glue the side to it. Let it sit (the stick and paper should stick together), while we glue the next one. And so we made the preparations and proceed to the next step.

Step 3. We make the first turn of the stick, pressing firmly and straightening the ends of the tube. Then don’t try to twist it too tightly, you’ll only wrinkle the paper. You just need to give it the shape of a tube. Then, on the floor on a mat, start rolling the sausage (as with dough), at first lightly, then you will feel that it is curling up. Then you press firmly and roll until you feel the stick. Try to ensure that the ends where there is no stick are the same thickness as the center. And also, if you roll a tube and it doesn’t curl, it means the stick has come unstuck.

Step 4. Secure the tube with clothespins. Clothespins have two sizes of recesses, we fix them in the second - smaller one. Possible for three clothespins.

Step 5. First glue between the clothespins, then remove them and finish gluing where the clothespins were. I carefully glued it with PVA glue with a needle. The tube is ready.

This way I glued two tubes together. The tubes, if glued this way, will not move. They will be even. I applied the glue with a toothpick between the tubes directly from the top. And also, don’t forget to lay all the tubes with the seam facing up - this will be the wrong side.

My clothespin only fits two tubes into a large recess.

These are the stripes we got for the frame. One photo is missing of how I glued 4 tubes together. It’s already simple, cut out a strip no wider than 4 tubes and glue it on it.

I needed a frame for this picture. I laid it out as I saw fit and measured the internal size.

I made a mark on a ruler from corner to corner and cut with a very sharp knife.

I cut out a corner and glued it onto it.

I constantly measured the frame so that it wouldn’t turn out crooked.

And here is the corner. It worked!

Bamboo paper photo frame

For a bamboo frame you need thin, dense tubes of foil or cling film. The tubes may differ slightly in diameter - this is bamboo, and in nature it can be different.

I cut the tubes, but it seems to me that whole ones are also possible; for example, I saved money because I didn’t have many tubes and I like it better when the flat side is near the frame.

First fitting. The stretcher was glued together from 2 corrugated cardboard sheets, the front side was covered with velvet adhesive film, and the back side was covered with wallpaper. On the top crossbar you can see that the sizes of the tubes are different.

Each prepared “stick” was pasted over with pieces of some kind of wrapping paper (found in bins). A jute rope was glued under the paper in several places (future jumpers - bamboo rings). Where there was a difference between the diameters of the tubes, I also wound a thread, having previously glued the tubes by overlapping smaller.

Cover the glue-dried tubes with brown putty (I covered everything well with my finger, paying attention to the jumpers).

When the tubes were dry, I carefully sanded them with fine sandpaper. In the places where the jumpers were, I used a brush with brown paint and, without waiting for it to dry, I seemed to stretch the paint away from the jumpers, thereby making the color transition smooth and natural.

Cardboard photo frames

Option 1:

Creating beautiful frames without the appropriate equipment is problematic. Therefore, collect a minimum set of tools. It should include:

large scissors;
stationery knife;
PVA glue;
a simple pencil;
scotch;
small scissors;
fine-grained sandpaper;
ruler.

Note: It is advisable to get a cutting mat; it makes it much easier to mark out the details of the future frame.

If you are not happy with the color of the cardboard for the frame, purchase a can of spray paint. To decorate photo frames, use shells, pebbles, glass, rhinestones, beads, etc.

In addition to the basic tools, you will need: a paint brush with soft bristles, a spray bottle, water and tongs. They will be needed to prepare the material for use.

Preparation of material

The best material to make your own photo frames is cardboard. Why? It is cheap and easy to process. Every home has at least one cardboard box and glue with scissors.

In its raw form, cardboard is of little use for making a photo frame. Its preparation comes down to the following - separate the top layer so that the corrugated part appears.

Sometimes this is not easy to achieve, since different types of cardboard are made with different amounts of glue and they have different thicknesses.

How to quickly peel off the top layer of cardboard:

Wet the part of the paper that needs to be removed. Distribute the moisture evenly over the surface using a brush. Wait 2-3 minutes for it to soak. Using your fingers or a knife, pry up the edge of the layer and try to remove as large a piece as possible. Cut off the rest. Clean off dried glue with sandpaper.

The method described above is applicable to large pieces of cardboard; for small ones, sometimes it is enough to rub the top layer.

Note: Spray the water more carefully. If you overdo it, the cardboard will become soggy. At best, you will have to wait until it dries. At worst, start the work all over again.

Instructions

First you need to decide what kind of photo the frame is being created for. It is not the content that is important, but the size and orientation of the card (vertical or horizontal). Based on this, proceed:

Step #1. Cut out the base.

Cut out the base of the frame from a large piece of cardboard. Its dimensions should be at least twice the size of the photo. Next you will understand why. Using a ruler and pencil, mark the contours of the future part. Then cut it out with scissors.

Step #2. Making a compartment for photography.

In the middle of the base, draw a rectangle slightly smaller than the photo for which the frame is being made. Carefully draw along the outline with a stationery knife and cut out a window.

Cut out a rectangle that will cover the photo hole on the back of the frame. Glue the door with tape on one side.

Step #3. We complete the preparation.

Make several cardboard strips of different lengths. Stick four of them around the photo compartment. Use the rest to create the structure of the front part. For clarity, look at the figure below.

To make the frame fit more tightly to the wall, glue triangles at the corners of the back. They compensate for the thickness of the door and allow the photo frame to hang more evenly.

Making triangles couldn't be easier. Cut one out using a pencil and then use it as a stencil.

Step #4. Decor.

Everything we did before had little to do with creativity. It's time to turn on your imagination to the fullest. Here is one of the options for designing a frame, but this is just an example, you can come up with your own version.

So, to decorate the photo frame we use the same cardboard. Take the prepared material with bare corrugation and cut into ribbons. Divide several of them into elements as shown in the figure below.

Next, glue the decorative parts onto the front of the frame. The result is an asymmetrical relief pattern. This photo frame is unique and, with the proper approach to manufacturing, will outperform its designer counterparts.

Additional photo frame design options are:

Traditional photographs have an energy that digital images lack. Enclose them in frames made by yourself. This will make the captured moments of life brighter and the design of the room unique.

Option 2:

You will need: corrugated cardboard, self-adhesive paper, scissors, ruler, pencil, colored paper napkins or corrugated paper, stationery stapler, thermal gun, photograph.

From cardboard we cut out 2 rectangles 16X20, one 5X15. On one of the rectangles in the center we draw another rectangle, retreating 3 cm from the edge, the inner rectangle is 10X14.

We place our rectangle on self-adhesive paper, trace it with a pencil and add 2-3 cm, as shown in the figure, cut out and carefully glue two large rectangles.

We cut a small rectangle (hereinafter referred to as the holder) from one edge diagonally as in the picture and also paste it over.

To make flowers from napkins, we will need 9 napkins, from which we will get 18 flowers.
Cut the napkin into two parts exactly in the middle.

Cut out a circle with a diameter of 5 cm from cardboard. Fold the cut napkin in half and fasten it with a stapler. Let's circle our circle.

Next we cut out and shape the flowers.

Using a heat gun, glue the holder onto the entire rectangle from the glued side.

On the other side we paste a photo.

We assemble the frame by gluing both parts and flowers.

Wooden photo frames

As you know, wood is an ecological, expensive and exquisite material.

Wood in any interior emphasizes aristocracy. By placing a wooden product in our home, we get a little closer to nature.

Step 1: Materials

You will need a couple of pallet boards for the project, although any other wood will do. In my case, the slightly weathered look of the pallet wood goes perfectly with the equally time-worn sign, so I used that. If you want to achieve a more polished appearance, then pallets can also be used, you just need to sand the boards thoroughly and, for example, coat them with varnish or paint.

For the back wall of the frame you will need something flat, such as MDF or hardboard. Thin plywood or thick cardboard will also work. The only requirement for the back wall is dimensions. The dimensions should be slightly larger than the visible area of the frame, and smaller than its edges. In other words, it can be the size of the frame, but a couple of centimeters smaller on each edge.

Step 2: Attach the object of adoration

Our frame is not quite ordinary; it will not be possible to insert glass into it, behind which the photo is placed. Since there is no glass, you will have to glue it down to prevent the photo from falling out. I used a car sign instead of a photo and glued it to the MDF (back wall) with hot glue.

Glue can be any kind, but hot glue goes faster.

Step 3: Cut out the frame

Now we need a ruler, and basic skills in working with a hacksaw (which all men have by default from birth). All you need to do is measure the length of the inner edge of the frame on the board, and draw 45-degree angles, and then cut the board along them.

Step 4: Putting all the pieces together

I just hot glued each side of the frame to the back panel and that was it. As you can see, there are small gaps between the boards, and I like this look even better.

Step 5: Glue it a little more

Along the edges of the back wall I applied another thin layer of glue for additional adhesion.

Step 6: Frame Mounting Hole

The hole for fastening is made from the back side, and the main thing here is not to make it through.

Step 7: Finishing Touches

Frame made of tree branches

We will need:

thin branches;
cardboard;
glue gun or superglue;
moss (real or decorative);
decorative flowers;
acrylic paints;
craft varnish (optional).

To make such a frame, you need to take a responsible approach to the choice of material. Try to choose branches of one or two sizes (thicker and thinner). It is better not to take twigs with slippery bark, as over time they will begin to dry out, which will make them not very beautiful. And it’s more difficult to work with slippery bark. Dry branches collected from the ground rather than plucked from trees are best.

The blank for the photo frame needs to be cut out of thick cardboard (and several layers glued together) or plywood. Next, paint the future frame brown or any other color. The main thing is not to leave it white, as it will not look very nice.

Free the branches from excess bark and straighten them. Cut to frame size. Place four thicker branches as the first layer and glue them.

Next, lay out another layer of branches. Increase their mass on the photo frame gradually, gluing each one separately. If you are using superglue, the reliability of which you are not too sure of, fasten the branches together with wire. It is advisable to choose wire of an inconspicuous color or completely cover the finished photo frame with spray paint so that the fastenings are not noticeable.

Glue moss around the edges of the frame. If you don't have anything similar, add leaves or pine cones that can be pre-painted.

Add decorative flowers or beads, painting them with acrylic to decorate them with berries. At the end, the craft can be sealed with non-toxic wood varnish.

Photo frame made from sushi sticks

Option 1:

Making a layout

We fold the sticks in the form of a lattice. To do this, we place two sticks parallel to each other at a distance of approximately 20 cm, then we place 5 sticks perpendicularly on them at a distance of 2.5-3 cm.

Preparing the components

We fasten all parts of the layout with threads. Then we repeat the same thing again. We should get 2 grids, the same as in the picture.

Connecting the components

We put the lattices together and tie them together.

The photo frame is ready!

We make a loop so that our frame can hang. Then we glue the photo using double-sided tape. That's all, the product can be placed on the wall!

Option 2:

Frame made of wood chips

Wood chips can be purchased at hardware and home improvement stores.

This frame will be a great gift. And you can use it not only for a mirror.

This frame design will be appropriate for photos and watches, and it is possible to place some beautiful composition of flowers or glass in the center.

Photo frames from improvised means

Pasted decor

You can glue a lot to a frame, everything is determined by the taste and imagination of the master.

Buttons

Photo frames decorated with buttons will look original, especially if you choose them in the same color. However, this is not a mandatory condition. The desired color uniformity can be achieved using acrylic paint. For example, buttons coated with gold paint will transform beyond recognition an old photo frame that by a lucky chance did not end up in the trash bin.

Beads, rhinestones

Over time, such things accumulate in abundance in every woman. All this can become a unique collection of materials for decorating an elegant frame with your favorite photo with your own hands; it is worth gluing them onto a pre-planned drawing or ornament. Tip: you can use whole brooches, beads, beads, pearls, interesting pieces of glass, fragments of broken dishes, mosaic elements.

Natural materials

A tastefully decorated frame in a natural style always attracts attention. After all, we are all children of nature.

Photo frames made of coffee beans, shells

Coffee beans

Coffee beans will be useful to you not only for making an invigorating drink, they turn out to be an excellent material for decorating a photo frame with your own hands: they have a wonderful smell, an original texture, a noble color, and they do not spoil. The work won’t take much time either: it’s not so difficult to use a glue gun or PVA glue to tightly line a standard photo frame with coffee beans, which in its new guise is guaranteed to become a leading interior accessory.

To make your handmade frame smell fragrant, buy star anise and star anise and find a place for them in the overall decor.

Shells

This is one of the rewarding materials for decorating a photographic frame with your own hands. For decoration you need shells of various shapes and sizes. In addition to shells, it is appropriate to use interesting glass, sea pebbles and other finds made on the sea or river bank in inlay.

Photo frames made from egg trays

These roses are made from regular cardboard that eggs are sold in in bulk.

All you need is a mirror, a few egg cartons, scissors, glue and spray paint.

1. Cut out the cells with petals

2. Cut out smaller petals inside the bud, and glue them with a slight offset of the petals.

3. Repeat until you have a full rose.

4. Glue the roses to the mirror. It is better to seal the mirror with masking tape, you still have to paint it.

5. Spray paint, let the paint dry and remove the tape.

Foamiran photo frames

Materials and tools

To make bright butterflies, prepare:

foamiran (plastic suede) 2 mm thick, black and two types of color;
thin white and lilac foamiran;
glue "Moment";
scissors;
pastel;
pencil;
paper;
cotton buds;
knitting needle

Manufacturing technique and photo

On paper folded in half, randomly draw a template with a pencil - half the silhouette of a butterfly, or download a ready-made picture. You can transfer the silhouette of an insect from a book or children's coloring book.

Cut out the pattern with scissors, lay it on black foamiran, trace it with a knitting needle, lightly pressing on the plastic suede. The material for the base can be dark blue, brown, the main thing is that the top layer is much lighter. Repeat for a different size and shape.

Fold the paper template in half again and cut out another silhouette that follows the contours of the first, retreating 2-3 mm from the edge. Repeat with another paper pattern.

Cut out all four butterfly silhouettes from foamiran. Make decorations from thin material of different shades.

Tint the top blank with pastel, placing it on a slightly damp cotton swab. Color without using strong pressure, the movements should be light to get natural “live” shades. Apply colors symmetrically - in nature, these insects are always mirror-like.

Also color the detail of the second butterfly.

Fold the painted parts in half and randomly cut them into equal parts. Immediately arrange the resulting elements on black symmetrically, otherwise it will be difficult to choose the same ones later.

If desired, also cut the resulting shapes into smaller ones. The smaller they are, the more interesting the wing pattern will be.

Lay out the entire pattern of the wings and begin gluing the decor to the base one by one. It is advisable to work from the edge to the center, leaving a small black gap between the workpieces. This will create a volume effect and make the craft more interesting.

Try to ensure that all elements are glued symmetrically. Remember the perfection of nature.

Now you need to prepare the photo frame. From thick foamiran, cut out two circles that make up the base of the frame; in this master class, the diameter is 22 cm.

Make a smaller hole in one of them (for the desired photo).

Cut out a blank that fits half of the top photo frame. Glue it to the bottom base of the photo frame. Glue the front part on top. Follow the instructions printed on the glue tube.