We certainly don't MythBusters", but today we will try to dispel the myth that the tablet iPad won't charge on computer. If your iPad is dead accumulator battery, then almost every user has probably tried two ways to charge the tablet:
- Charging the iPad from a 220 Volt network using an adapter
- Charging iPad from a computer using USB
I think that you did not have any problems with the first method. When you connect the device to a power outlet using the included USB cable and adapter, the iPad begins charging. The charging process is accompanied by a lightning icon that appears in the upper right corner.
If not original charger, then use MFi-certified USB cables and adapters.
But sooner or later, any tablet user tries to charge the iPad using the USB interface of a computer or laptop. Having connected the tablet to the computer with a cable, the inscription appears in the upper right corner of the iPad - “ No charging" The user’s reaction at this moment can be completely different: someone runs to the store in panic, thinking that they sold him a defective or semi-working iPad, while someone is trying to find the answer on the Internet and is now reading this article.
If you are faced with a similar situation, then, of course, there is no need to run anywhere, everything is fine with your tablet. The fact is that the iPad tablet requires more energy to charge than, for example, the iPhone, so the iPad tablet is charged from the computer only when it is in lock mode (standby mode).
In order to make sure that the tablet charges when its screen is locked, we decided to conduct an experiment and, using the included cable, connected the iPad to various USB ports on the computer:
- USB located on the motherboard itself, at the rear of the system unit
- USB connector on the front side (/extension adapter)
In locked mode, the iPad was slow to charge in any of the USB ports. Therefore, if the iPad charging time is not important to you, then you can connect the tablet to the computer and slowly charge it, not forgetting to press the screen lock button (sleep mode). If the screen is unlocked and the USB does not have enough power, then iPad won't charge via USB.
For whom the charging time of the iPad is of great importance, use the included network adapter and a 220 V socket. The tablet charges from the socket the fastest.
You probably know that the iPad can be charged not only with the charger it comes with, as well as charging from the iPhone, but also from a computer using a USB cable. All of these methods can charge the battery, although some will do it more slowly than others. However, sometimes an error occurs in which the message “No charging” is displayed. Most often this happens when trying to charge the iPad from a computer, but sometimes when connected to an iPhone charger.
The "no charging" message can appear for many reasons, but it is almost always related to the power source. Fortunately, this error can be easily fixed. Below we will talk about the most common reasons for the “no charging” message, as well as how to solve the problem.
1: Check portiPad
Before you do anything, check the charging port on the iPad itself. It may contain dust or small debris.
Use a wood or plastic toothpick to clean out the port until nothing is left in it.
It sounds stupid, but this is actually the most common cause of the error. iPad ports often get clogged because they are carried in bags and given to children to play with. Strange lumps of dust, plasticine, crumbs, dirt, etc. - all this can get into the port, which can cause the iPad to stop charging altogether. Anything on the port could be causing the error. Therefore, try to keep your device clean.
2: “No charging” message when connected to a computer
Often the error occurs when the iPad is connected to a specific Mac using a specific USB cable. This means that the USB port does not transmit enough energy to charge the iPad, and instead of charging, it continues to discharge. There are two possible solutions:
- Try connecting the cable to a different USB port on your computer.
- Try using a different USB cable.
Note: If the USB cable is damaged, it is better not to use it at all. We recommend purchasing only certified cords, as others in many cases do not work at all with Apple products.
3: ConnectiPad to regular 12W charging
Almost always, connecting the iPad to a standard charger that plugs into an outlet can solve the problem. It comes included with every iPad.
Note that you need to use a 12W charger rather than the iPhone's 5W charger, as the latter will charge the device much more slowly. If you play a game on your iPad while it is being charged by an iPhone charger, the battery may generally discharge due to insufficient energy being transferred. With standard charging, the device should charge perfectly.
If these methods do not solve the problem, contact a specialist. Some parts of your iPad may be damaged.
Don't miss Apple news - subscribe to our Telegram channel, as well as YouTube channel.
Sometimes it happens that it is possible to charge an i-device only from a laptop - there is not a single outlet nearby. An ordinary user of an Apple tablet connects the device and suddenly sees a message in the corner of the screen near the battery: “No charging.” This is a reason to enter into the search engine “iPad does not charge from the computer.” This problem will be discussed further.
Causes
Most often, users of older PCs and Macs encounter the “No charging” message. However, this warning is incorrect: the process continues, but only when the screen is in sleep mode (that is, turned off).
It's all about the ports - they cannot provide the same power that the network provides.
In order for the charging process to proceed normally, you need at least 2 amperes, and in older PCs - from 0.5 to 1 ampere.
In new Macs, such inconveniences do not arise, so there is no need to think about why the iPad does not charge from the computer.
Fast decision
If you want to charge your tablet quickly, you only need a 220 network. But if the socket method is relevant for you, we advise you to look for an adapter with 2 USB on one end and 1 on the other. This way you connect to two ports simultaneously, and with On the other side, connect the cable for the device. In this case, the power will double and the process will speed up.
And now you have finally become the proud owner of an Apple tablet. iPad computer. The first thing you did, after delight and a storm of emotions, you decided to recharge it from your home computer. And then you realize that the iPad is not charging from the computer.
Why won't my iPad charge from my computer?
Let's try to figure it out. This can happen for a number of reasons. First you need to understand whether it is even possible to charge an iPad from a desktop computer. The problem is that normal charging of the iPad requires a current of at least 1200 mA, but the computer's USB port can only output 500 mA. And the question arises, how to make it possible to charge the iPad from your home computer? Here are several options to solve the problem:
- First, you need to check all the ports on your laptop or computer. The motherboard may output slightly different amounts of current to different USB ports. Ports on a system unit are usually located on its front and rear panels, and on the sides of the laptop. If nothing has changed, don't panic. Even with such a low current, the iPad, although slowly, still charges, and even the “No charging” message next to the battery icon should not confuse you. It's charging, but so weakly that even the iPad doesn't understand it. You need to put the tablet into sleep mode, and it will begin to charge slowly but surely. However, this will be too long a process. In this mode, it will take about 23-25 hours to fully charge, and the desktop computer must remain turned on during this entire time and not go into sleep or standby mode. So, answering the question “does the iPad charge from a computer?”, we can confidently say: “Yes, but it’s too long and difficult.”
- To ensure that charging your iPad does not cause problems, you can turn to its older iMac brothers (especially those released after 2011). All of these computers have powerful USB ports that can charge your tablet without any problems.
- Buy yourself a brand new computer with motherboards from Asus and GIGABYTE. These motherboards will not only allow you to charge your iPad, but also reduce the time until it is fully charged by 2 times.
- How can you charge your iPad from your computer without having to buy a new one? You can purchase a cable with a USB 2.0 adapter. With this cable there will be no problems associated with the inability to connect the iPad to the computer. It will also allow the tablet to receive 2 times more energy. One of the cable connectors needs to be connected to the iPad and the remaining 2 to your home computer.
- You can also download special programs to your laptop or home computer, which will increase the current in the USB ports. Ai Charger from Asus and GIGABYTE ON/OFF Charge you can download these programs from the official websites of these companies.
- Perhaps the easiest way is to charge from a 220v outlet. Even if the iPad was purchased abroad and the charger is only suitable for European sockets, you can always buy an adapter, the price of which does not exceed 100 rubles.
And remember that if the iPad is completely dead, you may have to wait for 5 minutes for the charging icon to appear, and about 20 minutes for it to turn on. The time it takes to fully charge the battery varies depending on the iPad version.
- iPad - charges in 3-4 hours;
- iPad 2 - 5-6 hours;
- iPad 3 - more than 6 hours;
- iPad 4 - about 5 hours thanks to the new charger;
Try to always monitor your battery level. There have been cases when, after 1 month without recharging the iPad, there was not enough energy to even start charging the battery.
All this will help you avoid problems with your new friend and charge your iPad from your computer.
Technologies are expanding and improving to make our lives more comfortable. Just think how much easier it would be if we didn't have to worry about charging our devices. But while this problem is not solved, let's discuss how to charge the iPad from a computer.
Charge correctly
The problem may arise if you forgot the adapter or it is broken. To charge your tablet from a PC, you need a cable, preferably an original one or one with verified MFI certification. You need to understand how to properly charge your iPad. It would seem that everything is elementary: connect the cable to the tablet, insert it into the USB PC - and you're done. But it's not that simple.
Speed up the process
When you are connected and the iPad is charging from the computer, “No Charging” will appear. But this is not a completely correct message. The charge is going on, just very slowly. And if you also use the device during the process, it will not charge at all. The point is this: to charge the tablet you need a current of at least 2 amperes, while the USB input produces an average of 0.5 amperes.
Let's say you find an input where the tablet charges noticeably faster. Now the answer to the question of how to charge an iPad from a computer is to put the device into sleep mode. The device will charge much faster if you do not use it during this process.
From Mac
It's great if you own a Mac because it has more powerful ports that can provide enough current to charge your tablet. You will hardly feel the difference between the Mac and the outlet.
The answer to the question of how to charge an iPad from a laptop is to buy a special cable, on one side of which there is an output to a 30 pin connector or lightning, and on the other a branch to 2 USB. This way you can connect to two ports at the same time, which will double the current.
Useful additions
An excellent solution to the problem could be a program for charging iPad via USB or a special device, the principle of which is to launch a mechanism for increasing the current in the USB ports of your laptop. This way you can charge your device faster.
The most popular from this segment are: Ai Charger, GIGABYTE On/Off Charge. These add-ons will perfectly cope with the problem of charging your iPad from a computer.
For car enthusiasts
If you own a car, you can easily charge your tablet from the cigarette lighter, but to do this you must have a USB adapter to the cigarette lighter for iPad. This, one might say, is the answer to the question of how to charge an iPad without charging. However, you should not leave the device overnight, since it is possible that in the morning your car’s battery may be discharged.
We also want to recommend to our car enthusiasts a high-quality electric transport store https://elt-shop.ru/speedway. You and your family will be able to fully appreciate the convenience and advantages of electric scooters from this store.
Using Power Bank
The last option on how to charge an iPad without a charger is external Power Banks.
Mobile charging device USB provides the required current and will easily charge the tablet if you only have a wire, and the speed will be the same as from a regular 220 Volt network.
The most popular and reliable are external batteries Chinese company Xiaomi. There are models for 5000, 10000, 16000 amperes. Apart from the Xiaomi Power Bank, there are other options in this segment that provide a high-quality and durable product. There is something for everyone.
