Create remote access to the computer. Mechanism "Internet-ID" - remote access has become easier. How to connect remote access to a computer via the Internet

RDP (Remote Desktop) is a remote desktop that has been built into Windows since XP. This is a protocol that allows connect to the target computer from anywhere in the world where there is access to the Internet. Currently, RDP can also be used on MacOS, and almost all mobile devices Oh

What you need to know before using

Initially, it was assumed that RDP would be used in local network. Those. at enterprises, or at home on computers connected to the same router.

But now for such a connection you can use Internet, which we will discuss below.

To connect, you need to know device IP address, to which you want to connect. You also need to know what address is used on the computer. static or dynamic.

We are specifically interested static address. Let's see how to set it.

There is another way - this is to change the settings for distributing addresses to router. Here we need bind specific ip to the MAC address of the device. We will not go deep, because if the user knows how to configure the router, then there will be no problems, and if not, then a rather long setup instruction will be required.

How to set up the system

The next thing to do is - allow access via RDP to the target computer. It's easy to do - go to Control Panel and click on the icon System.

On the left we are looking for an item Remote access settings

In the window that opens, activate items shown in the screenshot below. You can also set permissions to use this feature by certain users.

How to connect to desktop

Often using the standard remote desktop feature does not require installation of additional components. However, Home versions of the operating system do not have this feature.

To launch the connection window in versions of Windows 8 and 10, it is enough to start typing " remote Desktop».

Older versions require start from start menu. To do this, go to the point Standard and launch the connection shortcut.

If this shortcut is not in Start, you can try to find it in system folders. Opening the disk C\Windows\System32 and looking for a file mstsc.exe.

When the window opens, it will be enough set ip address PC to which you want to connect, then specify login And password. After a few seconds, the desktop of the remote computer will open.

Going through the bookmarks, you can specify a set settings such as screen resolution, programs to run, device redirection, etc.

Using RDP on MacOS

In the event that you need to connect to a Windows computer with a MAC, you will need to App Store download app Microsoft Remote Desktop.

After installation launch program, looking for an icon plus and click on it. In the window that opens, create a new connection where you need to set ip, login, password and enter any name.

As in Windows, here you can install options screen and other settings. After all the manipulations, close the window, look for the given name in the list and run it. If everything is configured correctly, the desktop of the computer will open.

Usage on Android and iOS

On mobile operating systems, you can also use this technology. Connection on Android phones and tablets, as well as iPhones and iPods is practically no different from Windows.

Search in google play or app store application Microsoft Remote Desktop And install his.

After starting, regardless of the operating system, a window will open in which you need to enter the same data as in the previous sections. If the settings are correct, then the device will connect to the PC.

Using RPD over the Internet

The principle of operation of Remote Desktop via the Internet is no different from the above, but there are some peculiarities.

First of all, there will already be needed not interior(local) and external static ip address. In addition, you need to do port forwarding to the target computer.

Also, in the case of an external connection, specifying ip is not enough, you will need to put it through a colon port.

It is worth noting that this method is often used in enterprises or firms, because. At home, you will need to contact your ISP to forward the port. Best to use at home specialized remote desktop software.

Remote access to a computer via the Internet will allow you to control your PC, even if it is thousands of miles away from your location.

The technology works on the principle of assigning a unique identifier to the user in the global network.

This data is used to connect to the remote control.

The function can be configured both using the system functions of the Windows operating system, and using additional programs(their use is usually free).

Notice! In order to access remote computer via another PC, the remote PC must be turned on and have an Internet connection. Also, the function or program that provides a remote connection must be enabled on both devices. operating system Windows has a built-in ability to set up a remote connection between two PCs.

Using the Internet ID feature in Windows

The Windows operating system has a built-in ability to set up a remote connection between two PCs.

The function is called Internet ID, it allows you to connect to the desired Host as quickly as possible.

In this case, all additional NAT network protocols are ignored by devices. This allows you to ensure a fast and uninterrupted connection.

Please note that the speed of a remote connection directly depends on the quality of the Internet connection.

Assigning a unique identification number on the network greatly simplifies the connection process. By using this feature, computers do not have to set up the reverse connection process every time.

Also, the Internet ID function is quite easy to use and can even be configured to work regular user.

How does an Internet ID work? The connection of two computers occurs due to the connection to a single Host. The interface is displayed using the NAT protocol or a standard firewall.

Follow the instructions below to set up remote access to a PC using the Internet ID option yourself:

First you need to get an identifier with which two computers can establish a connection. The procedure for issuing an identifier is carried out by the host free of charge;
Some builds of Windows may not have a previously installed utility. You can download it from the link http://db.repairdll.org/internetidadmin.exe/ru-download-50.html .
Install the tool on both computers and get to work;
Once installed, a host icon will appear on the desktop toolbar. Click on it with the right mouse button and select the connection settings item;

Then, in a new window, click on the appropriate button to get an Internet ID. This procedure must be done on the computer from which another PC will be controlled;

After a few seconds, a window will appear with a text field, which will contain an identifier that provides a remote connection between two PCs. Remember it, because without specifying an identifier on another PC, you will not be able to set up a connection;

Now you need to perform several actions on the client personal computer(to which you will connect). Run the installed utility, select the operating mode as "Client";
Click on the button for creating a new connection and in the window that opens, specify the name of the connection and the identifier itself. You can choose any name, and the Internet ID must match the one that was issued on the first PC. Press the OK key;

Next, the connection properties will open. Select the connection mode via ID, as shown in the figure below, and enter it again in the corresponding text field;

Now wait a few seconds and wait for the connection to complete. On subsequent attempts to gain remote access to another PC, it will be necessary to enter only the identifier on the administrator side, and on the client side, select the previously created connection template.

In addition to the suggested method for setting up remote access, you can use special programs which are even easier to set up.

TeamViewer

TeamViewer is one of the most popular applications for creating a connection and working with remote access to a computer.

The program is also available on operating systems Android, IOS, MacOS, Windows and others.

Such cross-platform will allow you to provide access to a computer even from your phone. You can download the application for the desired OS using the link to the developer's official page https://www.teamviewer.com/ru/download/windows/ .

The main feature of the utility is that the user does not need to deal with the client and server parts of the program separately. It is enough just to install the program on both computers and set up a connection in a few mouse clicks.

After the first activation, the application window displays a personal computer ID and an access password.

To connect to another computer, just enter its identifier in the Partner ID field and click the Connect button.

Advantages of TeamViewer:

The presence of several modes of operation of two computers at once: remote access, file and folder transfer mode, VPN;
During the connection, you can open a chat window, this will allow two users to communicate in real time without being distracted by other messengers;
To provide full-scale system administration of another PC, you can connect the option of 24/7 remote access. In the inactive mode, the function consumes few resources and does not load personal computers;
Speed and stable connection. Due to the availability of quality hosts, users do not face the problem of access failure (this only happens in case of a poor connection to the global Internet);
Please note that TeamViewer cannot be used for commercial purposes. The developer has built into the program a utility for determining the commercial connection. If it is detected, access to the PC will be immediately blocked.

If you want to use the modules for corporate connection, you will need to buy a paid version of the application.

Ammy admin

This program allows you to access the remote control function of other PCs. The functionality is very similar to the Team Viewer described above.

Available modes of operation include the ability to view and remotely control another user's personal computer or laptop.

The program can be used without installing it on two devices. It is enough to open the portable version on computers. The utility is not intended for use in commercial organizations and enterprises.

You can download Ammy admin on the developer's official website at http://www.ammyy.com/ru/.

To get started, run Ammy admin on both computers. Then enter the ID of the server computer on the client computer. Click on the "Connect" button. The connection diagram is also shown in Figure 8.

This application is more suitable for organizing a one-time connection than for long and regular work. Among the advantages over other similar software can be noted a simplified connection process, an intuitive interface and high speed.

Among the shortcomings of the application, it can be noted that it is not available on mobile devices and tablet PCs. There is also no folder and file transfer mode.

The use of the program is limited to fifteen hours per month. Such a function is organized to eliminate the possibility of commercial use.

Lite Manager

This utility has a user-friendly interface and a large set of options. The application has two parts: for separate installation on the server and client side.

Unlike previous utilities, using LiteManager will be more appropriate for more advanced users who need to organize regular access to a remote computer.

Also, unlike TeamViewer and Ammy admin, a unique identifier for the server PC is assigned only once (at the first start). In the future, it does not change. This will allow you to quickly remember it and in the future not have problems with its introduction on the client side.

Also, users have the opportunity to independently set their own identifier on the network.

The program itself is paid, however, if you do not need to use it for commercial purposes, you can download the LiteManager Free version. It is free and its operation is limited only by a filter that determines a possible commercial connection.

The application presents a large number of modes for connecting two PCs, namely:

Remote access;
Data transfer;
Chat organization mode;
Ability to access the registries of two PCs;
Task Manager.

Also available in the program is the function of recording a screen in real time, inventory options and installing programs on a client PC using a server. Among the shortcomings of the program, one can note its absence on mobile operating systems.

RAdmin

This software is one of the first programs whose developers were able to organize uninterrupted remote access to a PC using the Internet.

The main advantage of the utility is the organization of network security and protection against unauthorized copying of data by an intruder.

All transmission channels are protected by cryptographic algorithms.

Also, the application has a very good speed. The first connection occurs in seconds. You also have the opportunity to access the BIOS of a remote computer.

The utility cannot set up a connection without specifying the IP address of the server PC, that is, connection by ID is not possible.

All modern applications for working with remote access are characterized by fast operation and a convenient user interface.

Choose the appropriate connection method, based on whether it will be regular or one-time.

Thematic videos:

In this article, you will learn how to use the Internet to connect to another computer, remotely control it from another computer, install programs for both computers. In this case, one computer will be the "host computer", and with its help it will be possible to control other machines in any place, while they both have access to the Internet, are connected to the network and have the appropriate software. Programs such as Team Viewer and Chrome Remote Desktop are freely available and available on any computer or even iOS or Android mobile device, while Windows Remote Desktop can be installed on your primary Windows computer and accessed on other Windows or Mac computers.

Step 1. Using the computer you need to access, go to the TeamViewer download site. To do this, go to the following link: https://www.teamviewer.com/en/download/ in any browser. The site will automatically detect your operating system.

The note! If the operating system is detected incorrectly, indicate your OS in the appropriate box in the middle of the page.

Step 2 Scroll down the page and click "Download" - this button is located at the top of the page. After that, the installation file will start downloading.

Step 3 Run the TeamViewer setup file . On Windows it is called "TeamViewer_Setup", on MacOS it will be "TeamViewer.dmg".

Step 4 Install TeamViewer . For this:

Step 5 Find out your computer ID . On the left side of the TeamViewer window, there will be a section with a user ID under the heading "Allow remote control". You will need this ID to access the host computer.

Step 6 Change your password . For this:

Step 7 Download, install and open TeamViewer on your second computer . This should be the computer you will be using to access the main computer.

The note! You can also download TeamViewer on your iPhone or Android.

Step 8. This field is located on the right side of the TeamViewer window.

Step 9 Make sure "Remote Management" is installed. If not, click on the circle to the left of this option in the menu. Click "Connect to Partner" . This option is at the bottom of the window.

Step 10 Enter the password you set in the "Allow remote control" section.

Step 11 Sign in. Look at the screen of the connected computer. After a while, you will see that the screen of the first computer appears in the TeamViewer window on the screen of the second computer.

The note! When you see the host computer screen, you will be able to interact with it as if you were working directly with it.

Video - How to connect to any computer using TeamViewer

Method 2: Chrome Remote Desktop

The note! If you don't have Chrome browser on your computer, you'll need to install it first.

Open the Google Chrome browser on your main computer.
Search Google Play for Chrome Remote Desktop.
Click Install. This blue button is in the top right corner of the application window. This will install the Chrome Remote Desktop app in the Chrome browser and open the Chrome Apps page in a new tab.
Click the "Chrome Remote Desktop" icon . This is an icon in the form of two monitors with the Chrome logo on one of them.
Log in to the app. It depends on your browser settings, but most likely you will need to select a Google account and then confirm.
Click Get Started. Start working on the system.
Click "Allow Remote Connections" . This button is located in the lower right corner of the window.
Accept the terms and start the installation when prompted . The corresponding blue button will be at the bottom of the popup. This will begin downloading the setup file (Windows) or DMG file (Mac) to your computer.
Install the app. To do this, on Windows, double-click the Chrome installer, then click Yes when prompted. Mac - Double click on the DMG file. Click "OK" on the pop-up window. Then open the Apple menu, select System Preferences, click Security & Privacy, click Open Anyway next to the chromeremotedesktophost message, and click Open. Drag the Chrome file to your Applications folder.
Open the app.
Enter your six-digit PIN twice. Do this in the "PIN" and "Enter PIN again" fields.
Click OK. After that, the main computer will be ready for remote work with other machines.
Download, install and open Google Remote Desktop on a second computer. Do all the same things that you did with the main computer, with the computer that will be connected to it. Also make sure you are signed in with the same Google account.
Click on your computer name .
Enter your six-digit PIN and click "Connect" . This is the same PIN that was set for the host computer.
Use remote work . The screen of your main computer will now be displayed in your Google Chrome browser.

The note! There may be a slight delay when working on the host computer, as the Internet may slow down some processes.

Method 3: Windows Remote Desktop

connecting to a PC from any other computer, if it has a Remote Desktop application. In this case, you risk the most, but you can connect to any OC, including Mac and Linux;
Another option for remote connection to computers is the ability to connect only machines using the Remote Desktop Protocol that supports Network Level Authentication technology, and these are only systems starting with Windows 7.

Thus, if you are using older systems and at the same time advocate for security, then choose the first type of connection, and if more modern systems Windows, you can choose the second one.

Video - How to connect to Windows Remote Desktop

The remote assistant is the most useful option of the Windows operating system. It allows two PCs to interact at a distance, in this situation the computer has two users at once - one that sits directly in front of the real computer and the second, which is located in a completely different place, but on his PC he can not only watch what is happening on the display first, but also manage it. Remote Assistance is a great solution when an inexperienced user needs to quickly configure or fix something, and he does not know how to cope with this task. However, to start using Remote Assistance, it must be configured accordingly. We will go through the process of activating Remote Assistance, and also explain how how to set up remote access on the example of a PC running Windows 7.

How to activate the remote PC access option?

Activation of remote access to a PC is carried out through the "Control Panel" of Windows. We execute the following instruction:

3. Click on the link "System".

4. A new window will open in front of us, click on the link "Setting up remote access" in it.

5. Now click on the "Remote Access" tab and check the box "Allow remote assistance connections to this computer".

6. Press the "Advanced" button, the "Remote Assistance Options" window will open in front of us. If you check the box "Allow remote control of this computer", the remote assistant will be able not only to see the screen of your PC, but also to control it. Also here you can set the maximum time during which the help session will be active.

7. After installing additional settings, click "OK".

8. Done! We have activated Remote Assistance.

So, we have activated Remote Assistance, but that's not all. Now you need to "friend" the computer on which the configuration is being carried out with the computer with which you want to interact via remote access. Setting up remote access is a more complicated procedure than activating it, but if you carefully follow the instructions below step by step, everything will work out. So:

1. Click the "Start" key, click on the "Service" folder in the menu, and select the "Windows Remote Assistance" item in it.

2. A window will appear, in it we click on "Invite someone you trust to help." Pay attention to the explanation of the link - "The assistant with whom you wish to interact will be able to see the display of your PC and control it." However, if you have disabled control in the previous instruction, you will only be able to view the screen.

3. Now you can choose the type of invitation, the most universal option is "Save invitation as a file", you can save the invitation on your computer and send it out in ways, not only via mail, but also via, for example.

4. So, click on the item "Save invitation as file", specify the path to save and click "Save" - at this step the remote access window will be launched with a password to it - below you will see the line "Waiting for incoming connection".

5. Now you need to transfer the file to the assistant in any way convenient for you, it will open as follows, send the password to the user.

6. To see your desktop, the assistant will only have to enter the password, after which you will see a confirmation window on your desktop to allow remote access, click "Yes" and the management session will be started.

7. However, for now, your assistant can only see your desktop, and not manage it. To start management, you need to send a management request (at the top left in the Remote Assistance, click "Request management"), you, in turn, must accept it.

8. That's all, now the assistant can start managing, and you can end the session, pause it or open a dialog box at any time.

Important! If at the step "Save the invitation as a file", the PC tells you that this PC is not configured to send invitations, the problem is most likely in the firewall settings. Reconfiguring them is very simple - go to the "Control Panel", select the item "Windows Firewall".

In the "Allow programs through Windows Firewall" window, click the "Change settings" button.

And then tick the two boxes opposite the line "Remote Assistance" and click "OK".

Results

So, now you know how to set up remote access, and in an emergency, you can ask your friend who understands the hardware better than you to help deal with a difficult situation. We hope this article helps you solve your problems! Good luck!

Remote access is a computer feature that allows you to connect to a computer via an Internet connection from another computer. To use remote access, the computer must be turned on and the access function must be installed and activated. Only then can you access and work remotely with your computer from another device.

In addition to the fact that you can use the computer remotely, there are some other functions, namely:

File transfer - allows you to copy files from a remote computer or vice versa.
Guest access - allows your friends to access your computer, for example, to help solve a problem.

Remote access communications are encrypted and contain digital signature, which serves to prevent third parties from accessing your computer.

So, how to set up remote access on a computer? There are several ways, namely windows and with support programs.

Connecting to windows 7 via "Remote Desktop"

First, go to the "Control Panel". You can do this from the Start - Control Panel menu. In the window that opens, the category view is usually selected by default, we need to switch to "Small Icons" or "Large Icons" (it all depends on your preferences).

In the system properties on the left panel, select "Advanced system settings".

In the window that opens, select the "Remote Access" item:

Check the box next to "Allow remote assistance connections to this computer".

Select "Advanced". In this item, you can configure whether or not to allow remote control of the computer and set the strings during which session connections will be maintained.

In the "Remote Desktop" section, select "Allow connections from a computer running any version of Remote Desktop".

Click on the "Select Users" button and add users who will have remote access to the computer.

Click "OK" to complete the settings.

To connect to a computer with remote access enabled, you need to know the computer's IP address. In order to find out the IP address you need to run command line. In it you need to enter "ipconfig". In the list that appears, look for your connection (usually "LAN connection" or " wireless connection”) and see the IPv4 address - this will be the set of numbers we need.

We launch on the computer from which you want to get remote access, the program "Remote Desktop Connection". To do this, go to the "Start" menu - "Accessories".

In the window that opens, specify the address of the computer to which we are connecting (IP address or name) and click "Connect" to test the connection.

As a result, you will see a window prompting you to enter a username and password to connect to a computer.

Connecting to a remote computer using TeamViewer

TeamViewer - package software for remote control of computers. The program allows, having gained control over the computer of another user, for example, to help him remotely configure programs on a remote computer.

First you need to download and install TeamViewer. To download TeamViewer for free from the official website of the developers, follow this direct link.

When installing the program, select the "Install" option. It is also necessary to note the item "personal / non-commercial use".

After selecting the TeamViewer installation settings, click on the "Accept - Finish" button.

We are waiting for the installation of the program to complete. After we launch the program and proceed to its configuration.

In order to remotely connect to another computer, you need to enter the details of the computer that we are going to manage on the "Manage Computer" panel.

In the "Partner ID" field, enter the partner ID. These data (ID and password) must first be obtained from the user of the remote computer, which we will remotely manage.

After that, click on the "Connect to a partner" button.

In the window that opens, in the "Password" field, enter the received password, and then click on the "Login" button.

So, the connection was successful, the desktop of the partner's remote computer is displayed on the monitor screen. By default, wallpaper will be disabled on the desktop.

That's all, I hope this article helped you figure out the process of connecting to a remote computer.

FayTan.ru

Remote access to a computer on windows 7

Sometimes windows user 7 encounters a number of system or application problems that it is unable to resolve on its own. Then you have to either drag your hardware to a professional, a computer master, or wait for him to arrive at home.

However, there is another little "trick" - the Remote Assistance tool, which allows Windows users to help each other remotely. I will tell you how to set up remote access in this article.

Setting up Remote Assistance

As mentioned earlier, windows 7 users can help each other over the network. The user who needs help will need to enable Remote Assistance. To do this, go to "My Computer" and find the "System Properties" parameter there. In the column on the left, we see the "Remote Access Settings" function, click and follow on.

In the "Remote Access" tab, check the box next to "Allow remote assistance connections to this computer". Here we see "Advanced", here you can allow your "assistant" to control the device with you or just watch your screen. Here you must decide on your own.

Windows firewall: how to set up

We go to "Start" and look for "Control Panel" there, go to "System and Security", then "Windows Firewall", on the left we see the mark "Allow startup ...", go to it. Then we see in front of us a list of "Allowed programs and components", we need to find another item "Change settings". Then check the box next to "Remote Assistance".
In the "Start" we go to "Help and Support", in the "Ask" section we see "Requesting help from another person", we find the item with Remote Assistance there. Now you need to select "Invite someone you trust to help." Next, you need to make a choice between "Save invitation as a file" or "Invite by e-mail". However, remote access to windows computer 7 is possible not only through remote assistance.

How else can you get remote access to a computer?

Sometimes working with the built-in Remote Assistance on Windows 7 can seem inconvenient. You need to perform a lot of unnecessary actions.

Such work can be facilitated by remote access utilities (for example, TeamViewer), which are simply teeming with the worldwide web. They can be downloaded fairly quickly and for free. Just be careful when jumping and do not pick up viruses. To use such programs, you only need a password, and the same software installed on a person’s computer that will help you.

learnwindows.com

How to set up remote access to a PC? detailed instructions

Remote Assistance is the most useful option of the Windows operating system. It allows two PCs to interact at a distance, in this situation the computer has two users at once - one that sits directly in front of the real computer and the second, which is located in a completely different place, but on his PC he can not only watch what is happening on the display first, but also manage it. Remote Assistance is a great solution when an inexperienced user needs to quickly configure or fix something, and he does not know how to cope with this task. However, to start using Remote Assistance, it must be configured accordingly. We will look at the process of activating remote assistance, and also tell you how to set up remote access using the example of a PC running windows 7.

How to activate the remote PC access option?

Activation of remote access to a PC is carried out through the "Control Panel" windows. We execute the following instruction:

3. Click on the link "System".

4. A new window will open in front of us, click on the link "Setting up remote access" in it.

5. Now click on the "Remote Access" tab and check the box "Allow remote assistance connections to this computer".

7. After installing additional settings, click "OK".

8. Done! We have activated Remote Assistance.

Setting up remote access

1. Click the "Start" key, in the menu click on the "Service" folder, and in it select the "Windows Remote Assistance" item.

3. Now you can choose the type of invitation, the most universal option is "Save the invitation as a file", you can save the invitation on your computer and send it out in ways, not only via mail, but also via Skype, for example.

4. So, click on the item "Save invitation as file", specify the path to save and click "Save" - at this step a remote access window with a password to it will be launched - at the bottom you will see the line "Waiting for incoming connection".

5. Now you need to transfer the file to the assistant in any way convenient for you, it will open as follows, send the password to the user.

8. That's all, now the assistant can start managing, and you can end the session, pause it or open a dialog box at any time.

Important! If at the step "Save the invitation as a file", the PC tells you that this PC is not configured to send invitations, the problem is most likely in the firewall settings. Reconfiguring them is very simple - go to the "Control Panel", select the item "Windows Firewall".

In the "Allow programs to communicate through windows firewall» Click the button «Change settings».

And then tick the two boxes opposite the line "Remote Assistance" and click "OK".

Results

LiveLenta.com

How to set up remote access to a computer: three easy ways

It would be great sitting at one computer to open files on another, listen to music on the third, chat with friends on Skype on the fourth and print documents on the fifth. Someone will say: "This is fantastic." And I will answer: “No, reality!” To set up remote access to a computer that is arbitrarily far away from you, all you need is the permission of its owner and access to the Internet.

Remote connections are used very widely - to administer the company's computer park, help users, access files when you have to work on different machines. And it's very convenient. Today I will talk about ways to manage the desktop of a remote PC using the operating system and two third-party programs.

windows remote desktop

The Remote Desktop application does not require installation - it is natively present in all versions of windows, starting with XP. To connect with it to another PC, you need:

So that both machines have Internet access or are on the same local network.
Enable remote connection permission on the remote computer.
Have a password-protected account on the remote machine.

Remote access permission is enabled in the "System" application (it is convenient to launch it from the Start context menu) in the "Advanced system settings" section.

In the advanced options window, go to the "Remote Access" tab and mark the items highlighted in the screenshot. I show on the example of windows 8.1. In other versions of windows, the window view is slightly different, but similar options are in the same place.

If you, like me, set up access on a windows 8.1 machine, create a "white list" of those who will have the right to communicate with it. Click "Select Users" and add desired names.

This completes the setup.

Subsequent actions are performed on the operator's machine.

To quickly launch Remote Desktop, press the hotkeys windows + R and type mstsc in the "Open" field.

In the login parameters, write the name of the computer to which you are connecting (indicated on the system properties tab of the same name), as well as the user - your account On him. Let me remind you that the account must have a password.
Click "Connect" to start the session.

Now let's take a look at the rest of the sections of this window. If desired, set the remote PC's desktop size and color depth on the Display tab (but note that high resolution and highest color quality will slow down the connection).

Set up, if necessary, "Local Resources" - sound broadcasting, hotkey management, shared clipboard, and more.

In the "Interaction" section, set performance parameters depending on the connection speed. Here, as a rule, nothing needs to be changed.

The Advanced tab contains the best default security settings.

So, after clicking "Connect", a password entry window will open. Type it in and click OK.

The desktop of the remote computer opens in a new window. Manage it in the same way as the one you are currently sitting at.

If there is a user behind that machine, after connecting, the user's session will be logged out and the splash screen will be displayed. He will be able to log in again as soon as you close "Remote Desktop".

teamviewer

TeamViewer is perhaps the most popular program for remote access to computers with various operating systems, designed for both experienced users and complete beginners. It is free for private non-commercial use.

TeamViewer is available in both installation and portable versions, including options for mobile devices. In addition to remote control, it can be used to share files, chat and use an Internet phone, connect other participants to the session, change control sides, take screenshots and screencasts of the remote screen, and much more.

How to use

To establish a connection, it is enough to know two things:

ID - numerical identifier of the computer in the program (assigned once);
Password (changes every time you connect).

This data must be provided to you by the partner - the user of the remote PC.

The main window of TeamViewer is divided into 2 halves. On the left are your ID and password, on the right is the field for entering the partner's ID. Enter it and click "Connect".

In the next window, enter the partner's password and click "Login".

By the way, the program is not bad as a means of parental control.

To remotely control your own PC, for example, home PC from work, it is enough to assign a permanent password to it in TeamViewer. To do this, go to the "Connection" menu and click "Set up uncontrolled access".

Set a password and click Continue.

We refuse to create an account (if you wish, you can create it, but for this it is not needed).

And we will complete the work of the wizard.

Use the ID number shown in the last box and the password you just assigned to connect.

Ammyy Admin

Ammyy Admin is an even simpler remote desktop access tool than TeamViewer. It does not require installation, is free for private use and is very straightforward to use. Connects to a partner by ID or IP address (the second option is for local networks). Works only in windows.

The Ammyy Admin window is also divided into 2 halves: yours and your partner's.

Instead of a password, consent to the connection is used here. When you click the "Connect" button, the partner must click "Allow" in response.

The remote screen of Ammyy Admin, unlike TeamViewer, is not scalable, but the main functions - management, file transfer and voice chat are present in it. The control panel is shown in the screenshot below.

Warning: Ammyy Admin doesn't like antivirus very much, although there is nothing malicious in it. If your antivirus tries to block a program, add it to the exception list or suspend protection for the duration of the session.

Windows Remote Desktop, TeamViewer, Ammyy, Admin and other similar applications protect your data from outside interception through strong encryption. Therefore, working with them is comfortable, safe and you can not be afraid for the confidentiality of information. Use and enjoy!

f1comp.ru

How to connect remote access to a computer via the Internet

Remote access to a computer via the Internet will allow you to control your PC, even if it is thousands of miles away from your location.

The technology works on the principle of assigning a unique identifier to the user in the global network. This data is used to connect to the remote control.

The function can be configured both using the system functions of the windows operating system, and using additional programs (their use is usually free).

Notice! In order to access a remote computer through another PC, the remote PC must be turned on and have an Internet connection. Also, the function or program that provides a remote connection must be enabled on both devices.

The windows operating system has a built-in ability to set up a remote connection between two PCs.

The function is called Internet ID, it allows you to connect to the desired Host as quickly as possible.

In this case, all additional NAT network protocols are ignored by devices. This allows you to ensure a fast and uninterrupted connection.

Please note that the speed of a remote connection directly depends on the quality of the Internet connection.

Assigning a unique identification number on the network greatly simplifies the connection process. By using this feature, computers do not have to set up the reverse connection process every time.

Also, the Internet ID function is quite easy to use and even an ordinary user can configure its operation.

How does an Internet ID work? The connection of two computers occurs due to the connection to a single Host. The interface is displayed using the NAT protocol or a standard firewall.

Schematic representation of the operation of a remote connection via the Internet

Follow the instructions below to set up remote access to a PC using the Internet ID option yourself:

First you need to get an identifier with which two computers can establish a connection. The procedure for issuing an identifier is carried out by the host free of charge;
Some builds of Windows may not have a previously installed utility. You can download it from the link http://db.repairdll.org/internetidadmin.exe/ru-download-50.html.
Install the tool on both computers and get to work;
Once installed, a host icon will appear on the desktop toolbar. Click on it with the right mouse button and select the connection settings item;

Host Options Window

Then, in a new window, click on the appropriate button to get an Internet ID. This procedure must be done on the computer from which another PC will be controlled;

Get ID window

After a few seconds, a window will appear with a text field, which will contain an identifier that provides a remote connection between two PCs. Remember it, because without specifying an identifier on another PC, you will not be able to set up a connection;

Received Host ID

Now you need to perform several actions on the client personal computer (to which you will connect). Run the installed utility, select the operating mode as "Client";
Click on the button for creating a new connection and in the window that opens, specify the name of the connection and the identifier itself. You can choose any name, and the Internet ID must match the one that was issued on the first PC. Press the OK key;

Option "Connect new connection"

Next, the connection properties will open. Select the connection mode via ID, as shown in the figure below, and enter it again in the corresponding text field;

Connection setup

In addition to the proposed method for setting up remote access, you can use special programs that are even easier to set up.