Electric boilers GALAN GALAX 9
The GALAX series electric boiler belongs to devices operating in closed-type heating systems with forced circulation coolant with the recommended most economical mode - the temperature at the entrance to the boiler is 35-45 ° C. The boiler operates in automatic mode with minimal maintenance. The device is equipped with systems that protect heating wiring from accidents:
coolant flow monitoring system,
safety valve.
The boiler is also equipped with circulation pump, pressure gauge and automatic air release valve.
For economy series boilers, only a pressure gauge and an automatic air release valve are installed in the hydraulic part.
Modern electronic system control ensures reliable operation in automatic mode, simple maintenance and high level thermal comfort in heated rooms A three-stage power control system allows you to alternately connect power stages to reduce the load on the network and also turn them off as the system warms up to increase the efficiency of the boiler. The control system provides for the connection of external devices for regulating the air temperature in the room.
The boilers are powered from a 3-phase network alternating current with a solidly grounded neutral voltage of 380 V with a frequency of 50 Hz. The quality of electricity must comply with GOST R54149-2010.
The boiler body has a degree of protection IP40 in accordance with GOST 14254-96, climatic modification UHL4 in accordance with GOST 16350.
Protection class electric shock 1 according to GOST 27570.0-87. For normal operation of the boiler, the following conditions are necessary:
the maximum temperature of the room in which the boiler is installed is from +70°C to +40°C; working - from +100 to +35°С, unless there are other requirements;
relative air humidity at 20°C - no more than 75%;
environment- non-explosive, does not contain aggressive gases and vapors that destroy metal and insulation, as well as industrial dust in quantities that destroy or disrupt the operation of the boiler.
The coolant used is any for heating systems with pH = 6.5-8.5. You can use ordinary drinking water San PiN2.1.4.559-96, distilled, melted snow, rain, (filtered), non-freezing glycol coolants or their mixture-1 with a freezing point not lower than -40°C. The maximum permissible pressure in the heating system before the emergency valve is activated is 3 bar.
Operating mode - long.
Electrode heating boiler Galan Galax-6 – electric cabinet boiler, automation unit included, models with pump, display, pressure gauge, built into a closed heating system, efficiency up to 98%.
Electrode heating boilers Galan series Galax are designed for heating residential and domestic facilities, various buildings and premises for administrative, utility, industrial purposes, etc.
These devices are flow-type case heaters that are mounted directly into a closed heating system and provide fast and efficient heating of the coolant.
Electrode boiler Galan Galax-6 has a single metal body with a mini-display, pressure gauge and visual controls. The device is standardly equipped with automatic control with indication, built-in automatic air vent and safety valve (3 bar), ammeter and current protection relay.
A choice of models is available in standard and extended configuration - with a circulation pump.
The electrode-type heating boiler Galan has an efficiency of up to 98%, is exceptionally compact and reliable, is 20-40% more economical than heating element boilers, quickly reaches operating mode and provides the desired temperature, and does not require a separate boiler room or special approval for installation. For large areas, parallel installation of several electrode boilers is allowed to increase power.
It is possible to install a GSM module (optional) for remote control boiler
Warranty period - 1 year
Country of origin - Russia
- electrode corps boiler
- automation included
- single metal body
- mini display and pressure gauge
- control and protection devices
- for closed heating systems
- Efficiency up to 98%
Do you have any questions? Write, we will answer instantly!
Main characteristics
Power 6.0 kW
Rec. heating area100 m2
Dimensions 600x450x200 mm
Weight 26.5 kg
Nutrition 220/380 V
Note electrode
Outlines 1
additional characteristics
Power 6.0 kW
Nutrition 220/380 V
Power type 1/3 phase
Power adjustmentNo
Height 600 mm
Width 450 mm
Depth 200 mm
Weight 26.5 kg
Control electronic
Installation type recessed
Guarantee period 1 year/years
Country of OriginRussia
Max. heating area100 m2
Availability of display Yes
Availability of built-in pumpNo
Availability of built-in boilerNo
Electrode Yes
Heating element and electrode boilers: operating principle, advantages and disadvantages
Today there is a large number of heating equipment on the market that runs on various fuels. The most reliable and simplest are electric models. Let's consider electric heating elements and electrode boilers. Heating element boilers are visually attractive equipment that provides wall installation, ease of installation and compact dimensions. They have starting and temperature control valves that ensure maintaining the required temperature in… read in full >Electric boilers
Electric boilers are modern heating boilers that use electricity as fuel. Electric boilers are used both for equipping private homes and for heating at commercial facilities, that is, according to their purpose, they are divided into domestic and industrial heating boilers. The use of electric boilers is relevant where power outages rarely occur and where there is enough power for normal operation of electric boilers, since... read in full >Selecting a heating boiler
Heating boilers are stationary devices that generate thermal energy during fuel combustion. The thermal energy they generate is transferred to the liquid carrier (water), hence another name - hot water boilers. Heating boilers differ in the types of fuel they operate on. There are electric, gas, solid fuel, diesel, as well as combined heating boilers. Depending on their purpose, heating boilers are divided into: single-circuit, which... read in full >Which boiler is better
It is probably impossible to unequivocally answer the question which boiler is better. For people with different incomes, under different operating conditions, both completely different boilers and, possibly, the same units will be suitable. It’s good that nowadays there is a fairly wide choice, it’s just that before settling on the final option, you need to carefully familiarize yourself with the assortment and consult with specialists. At the same time, you must be prepared for the fact that each of... read in full >How to choose a boiler
In order to choose the best boiler for your own home, you need to know what types of boilers there are, and follow a few simple rules that allow you to choose best option for specific conditions. So, boilers for heating and hot water supply are single-circuit and double-circuit, they can operate at various types fuel, be made from cast iron or steel, vary in cost and manufacturer, and have other strengths and weaknesses of their own. Single-circuit boilers… read in full >Steam boilers
A steam boiler is heating unit, designed to create saturated or superheated steam and heat water by burning fuel and converting chemical energy into thermal energy. Steam boilers can operate on gas, liquid and solid fuel. There are steam boilers low pressure and high pressure steam boilers. Their design is characterized by reliability and durability. Low pressure steam boilers can be used in the food industry to clean… read in full >In accordance with clause 3.2.1 and clause 4.1.1 GOST 33863-2016 “Energy efficiency. Heating equipment. Energy efficiency indicators and determination methods.”
Efficiency 98 ≤ Ƞs< 125 GOST 33863-2016 complies with the provisions of the European Union Commission Regulation of 18 February 2013 811/2013/EU*, supplementing Directive 2010/30/EU of the European Parliament and of the Council regarding the energy labeling of space heaters.
SAVE FROM 40% ON ELECTRIC HEATING BILLS
When using the Galan electrode boiler compared to any heating element boiler from any manufacturer.
Maximum efficiency and safety
Case design (heating elements and automation in one housing) as opposed to a modular (separate) design.
Possibility of use in conjunction with a 30 mA RCD (N and PE are separated).
Possibility of use in “warm floor” systems. The presence of a built-in relay that allows you to automatically put the boiler into operating mode after a long power outage.
2 basic modifications:
Single-circuit boiler GALAX G 105
Work only on the heating circuit.
- The presence of a built-in ammeter, which greatly simplifies commissioning and subsequent maintenance (up to remote technical support and consultations at the federal number 8-800-200-1681).
- The presence of a built-in current protection relay (I), set at production to the maximum permissible rated power of each boiler, which eliminates the operation of the circuit breaker in possible emergency situations.
- The ability, if necessary, to safely adjust the boiler power to the required heat balance of the heated room.
- The boiler includes built-in automatic air vent And safety valve(3 bar).
- Two versions - with and without a built-in pump.
Double-circuit boiler GALAX G 352
Possibility of working in 2 modes:
- only for the heating circuit;
- to the heating and hot water supply (DHW) circuit when using an indirect heating boiler with an additional circulation pump.
The presence of built-in current protection (I), set at production to the maximum permissible rated power of each boiler, which eliminates the operation of the circuit breaker in possible emergency situations.
- Indication and adjustment of heating temperature and DHW temperature. Indication of current current and pressure.
- Possibility of using preferential tariffs without additional devices if there are 2 or 3 tariff meters.
- The boiler includes a built-in automatic air vent (AVK), a safety valve (3 bar) and a pressure gauge.
