Do-it-yourself maintenance of Topas 8. Cleaning topas stations with your own hands. Only for forced

"Topas-8" is special equipment for the treatment of sewage waste and household wastewater by biological oxidation. Local systems are intended for use in low-rise residential buildings and summer cottages in the absence of centralized wastewater disposal. The Topas septic tank is designed for 8 people, the salvo discharge volume is 440 liters.

The supplier of treatment facilities is the group of domestic companies “Topol-Eco”. Production facilities are located in the town of Lobnya near Moscow. The company not only produces wastewater treatment plants (WTP), but also puts them into operation and provides maintenance.

The operating principle and design (Topas-8 septic tank) from Topol-Eco differ significantly from the designs of cleaning systems from other manufacturers. Compared to simple plastic tanks, the station performs deep bio-treatment based on biologically active bacteria, therefore it does not pollute the environment and belongs to the “Eco” class.

The Topas-8 septic tank consists of 3 main elements:

1. Reception chamber. The main part of the device into which untreated waste flows.
2. Aerotank chamber. In a container, activated sludge is mixed with wastewater.
3. Sludge settling tank. Retains part of the active mass accumulated in the aeration tank chamber.
4. Secondary settling tank. Secondary cleaning of the upper layer of liquid from the aeration tank from impurities occurs, with foreign substances settling to the bottom.
5. Compressor equipment box. Accommodates air supply units.

The Topas-8 unit is equipped with 2 compressors, which operate not simultaneously, but in turn. When the receiving chamber is filled, the alarm sensor is triggered and the first compressor starts working. When the liquid level drops to the minimum level, the compressor is turned off and the second equipment is activated.

The principle of operation (septic tank “Topas-8”) is based on a local biological system for treating household wastewater with preliminary sedimentation of large fractions.

The processing process is divided into several stages:

1. Sewage from the building with the maximum degree of pollution flows through the installation pipe into the receiving chamber. The liquid settles in the container and the decomposition process begins due to oxygen entering the chamber. Cleaning filters trap and contain solids. Airlifts direct settled water, sludge and large insoluble fractions into different compartments specially designed for each substance.
2. When entering the aeration tank, organic compounds decompose due to oxidation by activated sludge. The aerator supplies oxygen necessary for the development of biologically active microorganisms. Air flows from the compressor drive floating particles to the sides. Light, small inclusions float up.
3. The third compartment is a pyramid-shaped sump. Thanks to this design, the stabilized mass settles to the bottom, purified water is separated from the sludge and discharged through an auxiliary filter.
4. In the last chamber, the incoming liquid is re-processed and removed to the outside using a drainage pump.

After aerobic cleaning, the output is clean process water, which can be used for any household needs. It is transparent, has no small cloudy particles, dirt, and is odorless. Water is discharged into a ditch, drainage or reservoirs.

Main advantages

The main advantages of an autonomous system are:

1. High degree of purification - 98%.
2. Recycling of all household wastewater.
3. Convenient drainage of purified liquid.
4. Low power consumption.
5. Compactness.
6. Quiet operation.
7. No unpleasant odor.
8. Simple installation diagram.
9. Use of anti-corrosion materials for the manufacture of parts and components.
10. Operation in all weather conditions.

Modifications "Topas-8"

The model range of local treatment facilities is represented by the following modifications:

1. Standard version.
2. With the index "PR" - has a built-in pump.
3. “Long” - with an elongated neck.
4. "Long-PR" - with an extended neck and a built-in pump.
5. “Long-US” is a reinforced type with an extended neck.
6. "Long-PR-US" - complete set.

WWTPs are produced with gravity and forced discharge of purified water.

Standard model

The standard version has overall dimensions of 1.63 x 1.17 x 2.50 m and a weight of 350 kg. The technical fluid is discharged by gravity, so the model is suitable for use in areas with sandy soil. Mounting pipes are installed at a depth of 40-80 cm. Electricity consumption is 1-1.5 kW/day. Up to 440 liters of untreated water can flow from different bathrooms within 2 hours. Capacity - 1500 l/day.

Models with forced water drainage

The purification station is suitable for places with poorly absorbent soil (silty or waterlogged soil), as well as in cases where groundwater is located at a distance of 50 cm from the soil level. Models with the “PR” index (with forced drainage) have a storage tank for installing a pump with further water outlet to any side of the wastewater treatment plant. The liquid is pumped into an additional chamber, then removed using pumping equipment and is used for household needs.

Technical parameters of units with forced drainage:

1. Length - 1.56 m.
2. Width - 1.17 m.
3. Height - 2.6 m.
4. Weight - 365 kg.
5. Power consumption - 1.2-1.6 kW/day.
6. The depth of the pipe is 40-80 cm.

Forced water treatment plants are equipped with additional equipment:

• float type switch;
• a set of fittings and hoses for connecting to the pump;
• socket pipe made of polypropylene for sewerage, 160x4.9 mm in size and 150 mm long.

Long neck models

When laying pipes to great depths (80-140 cm), installations with an increased neck height (Long type) are used. The equipment has operational characteristics similar to the standard version and differs in size and weight parameters:

• length of the extended station - 1.52 m;
• width - 1.16 m;
• body height - 3.1 m;
• weight - 425 kg.

Installation of "Topas-8"

The structure of the autonomous sewage system is made of special-purpose polypropylene sheets, which are characterized by high mechanical strength. The use of high-quality material makes it possible to avoid concreting the walls and minimize installation costs. Installation work is carried out on the basis of SP 129.13330.2011 “External networks and structures of water supply and sewerage”.

Instructions for installing a Topas septic tank for 8 users:

1. Prepare a pit with a depth of 3.3 m. The width of the pit should be 30-40 cm greater than the width of the structure.
2. For operation at low ambient temperatures, it is better to insulate the pit walls with mineral wool.
3. Backfill 150 mm with sand and gravel, separating the layers with geotextiles.
4. Lay inlet and outlet pipes to the system entry point.
5. Bring the cable to the compressor compartment and insert it through a welded fitting with a diameter of 20 mm made of polyethylene low pressure. The electrical cable is connected according to the diagram given in the installation passport.
6. Lower the unit into the pit using a lift, check the horizontal and vertical levels. The deviation should be no more than 5 mm.
7. Install on outer wall equipment with stiffeners to prevent floating.
8. Fix the sprinkling with 300-400 mm of sand around the perimeter.
9. Fill the septic tank with water to a height of 400 mm.
10. They are evenly covered with sand, and the neck should rise above the soil level. Then you need to fill the system with water 1000 mm from the bottom.
11. Make an inlet hole for the input sewer pipe, install the pipe and weld it in a circle with welding wire. Connect the supply line to the branch pipe through a coupling.
12. Lay a pipeline to the point where the purified liquid is discharged.
13. Compressor equipment is installed, a pump is installed in the forced water treatment plant, and it is connected.

Septic tank maintenance

Once connected, the system should work continuously for a month. During the first 14-30 days before the transition to normal operation, an increased volume of foam may appear as a result of the formation of activated sludge. As the concentration of active mass in the aeration tank increases, the foam disappears over time. To reduce foaming, it is necessary to reduce the use of synthetic surfactants, which are found in powder, soap and other household products, during the initial period of operation.

The equipment operates automatically when electrical power is connected, so daily maintenance is not required. Maintenance The Topas septic tank is as follows:

1. Visual inspection - once a week.
2. Removing sedimentary sludge from the stabilizer - once every 3-4 months.
3. Replacement of compressors - once every 6-8 months.
4. Cleaning the bottom of the receiving chamber from sediment - once a year.
5. Cleaning the bottom of the aeration tank - once every 3 years.
6. Replacement of compressor membrane parts - once every 3 years.
7. Replacement of aeration parts of aerators - once every 10 years.

With proper operation and timely maintenance, an autonomous sewer system can last up to 50 years.

Wastewater treatment plant TOPAS 8 is a structure for a private house, dacha, cottage, designed for processing household wastewater. Used in cases where connection to the central sewerage system is impractical or impossible. Unlike conventional septic tanks, it cleans rather than accumulates wastewater. Helps take care of environment. Suitable for seasonal and year-round use.

The operation of the WWTP is based on a combination of biological treatment with the process of fine bubble aeration (artificial air supply) to oxidize wastewater components. The purification process involves the biochemical destruction of organic substances by microorganisms. Wastewater loses its tendency to rot, becomes transparent, and bacteriological contamination is significantly reduced.

The maximum insertion depth of the supply sewer pipe is 80 centimeters from the zero ground level.

Advantages of TOPAS 8:

• high degree of purification (at least 98%), full compliance with sanitary, hygienic and environmental requirements;
• compactness and absolute tightness throughout the entire period of use;
• no unpleasant odor;
• long service life - more than 50 years;
• simplicity and ease of maintenance;
• ease of installation;
• refusal of sewer services;
• maintaining operability after a long absence of wastewater.

Information about technical specifications, delivery set, country of manufacture and appearance product is for reference only and is based on the latest information available at the time of publication

Characteristics

Ask a Question

You can ask any question you are interested in about the product or the work of the store.

Our qualified specialists will definitely help you.

Shipping and payment

Payment options

Cash upon receipt

Payment in cash is possible upon receipt of the order at the point of issue, in our office or upon delivery by courier service. Please note that some pick-up points do not accept cash payments; the manager will clarify the possibility of payment when confirming the order. If the order amount is more than 30 thousand rubles, an advance payment may be required.

By bank card on the website

If you want to pay for your order online, you need to select the payment method “Card on the website” when placing your order. After confirmation of availability and delivery costs, an email with a link to your personal account will be sent to your email address. To pay for your order, you need to click on the "Pay" button in personal account, then you will be redirected to the bank’s secure payment page*.

By bank card upon receipt

Payment by credit card is possible upon receipt of the goods at our office and at the delivery points of our partners. Please note that some pick-up points do not accept payment by card; the manager will clarify the possibility of payment when confirming the order.

Cashless payment for individuals. persons

When placing an order, you must select the payment method "Payment by invoice". After confirmation of the order by the manager, an invoice for payment will be sent to your email, which you can pay at any bank that accepts payments from individuals or through online banking.

Cashless payment for legal entities. persons

To receive an invoice for payment, you need to place an order as a legal entity. person and indicate all the data necessary for issuing an invoice (TIN, KPP, company name). Once product availability is confirmed, you will be issued an invoice valid for 3 days.

Loan for up to 24 months or 6 months without overpayment

An opportunity for clients of Sberbank PJSC to obtain a consumer loan for a purchase without leaving home. Loan approval through Sbrebank Online. There are 2 lending options available:

• Loan for a period from 3 to 24 months. The total cost of the loan depends on the loan term and the cost of goods.
• For goods marked with the “Credit without overpayment” sticker, you can apply for loan for 6 months with a discount from our company. The discount is calculated in such a way that in the end, with interest, you pay the full cost of the product without overpaying interest on the loan.

If you don’t want to often use the services of vacuum cleaners, constantly clean the sewer, or monitor the level of wastewater, then it’s time to switch to the Topas 8 system. Once installed, you will have at your disposal a powerful bio-treatment station that works on the principle of aeration. Receiving flow from the sewer, the system will pass it through several compartments, cleaning it from impurities and dirt particles. At the exit, the purification level reaches 95%. Purified water can be used for technical needs, car washing, territory washing, garden watering.

Technical conditions for installation of the Topas 8 septic tank

Like Topas 8 PR, this septic tank consists of a septic chamber, an anaerobic compartment, an aeration tank, sedimentation tank, and a bioreactor. Due to bioactive microorganisms and the supply of oxygen, contaminated water is split: at the output we get a purified stream and sludge, which settles at the bottom of the compartment. Since this modification does not have a sump pump, operation of the station is permissible only in those areas where the level is low. groundwater. Otherwise, there is a high risk of system flooding. The ingress of groundwater will not lead to a complete shutdown of the station, but in this case its efficiency will be significantly reduced or equal to zero.

Turnkey installation of Topas 8

Since the station weighs 350 kg, it is necessary to use special equipment for installation work. Therefore, self-installation by one person is usually not considered - a team of craftsmen is involved. In 99% of cases, the buyer trusts the Topas-Lobnya company to connect the turnkey system. The cost of services in Moscow is reasonable - additional information can be obtained by phone.

Stages of installation work:

• preparing the site and digging a pit;
• laying pipes from the house to the pit;
• cable supply with grounding and protection;
• strengthening the base, forming a sand-cement cushion and formwork;
• immersion of the station into the pit;
• connecting pipes and cables;
• insulation of the station and elements (if necessary);
• test run;
• leveling the area.

Advantages of autonomous sewage system "Topas 8"

When choosing a cleaning system, many people first of all pay attention to the cost of the septic tank. If we make a comparison, Topas 8 may cost slightly more than other systems. However, here it is worth considering everything in a complex: initial costs, overall benefits and further needs for maintaining the station. If other systems are inexpensive and can be installed quickly, then most likely they have more technical difficulties during maintenance. With the Topas 8 septic tank it’s the other way around. The initial costs quickly pay off, the user gets rid of a number of problems and tasks, using plumbing fixtures, a washing machine or a dishwasher with pleasure and without headaches.

Key advantages of the Topas 8 septic tank:

• the possibility of installation on the territory of any private home (no more than 2 meters in length and width are required to install the station);
• profitable operation: you don’t have to spend money on the services of vacuum cleaners or technical specialists;
• absence of odors and emissions hazardous to the soil;
• autonomous work away from country house: the septic tank will be installed on a site a few meters from a private house,
• therefore, its operation will not affect anything;
• year-round operation: this means that frost and temperature changes do not pose a danger to the Topas septic tank;
• almost silent operation: it will not cause inconvenience to those who live in the house;
• affordable septic tank price.

Free delivery within Moscow

Delivery up to 50 km from the Moscow Ring Road (at representative offices outside the city limits) – 5,390 rubles.

Delivery over 50 km from the Moscow Ring Road (at representative offices outside the city limits) - plus 50 rubles. for every km.

You can pay for purchased products in cash or by bank transfer.new calculation. Payment is made upon completion of all work specified in the contract.

Today, the most optimal solution for collecting sewage is septic tanks. Their peculiarity is the ability not only to collect, but to effectively purify them with the help of aerobic microorganisms. There are similar cleaning stations different sizes and different productivity, if a large family lives in a house and a large volume of wastewater needs to be processed, then the Topas 8 septic tank is an excellent option.

Performance TOPAS

The biological treatment station Topas 8 is characterized by high productivity. The number 8 in the name is a reference to the number of people living in the household. This biological installation is capable of processing up to 1,500 liters of water per day, which is enough for household needs, taking baths and even using a bathhouse with a small pool.

Cleaning chambers

Provides a high degree of wastewater treatment through the use of biological organisms and a compressor. The installation itself is made of durable plastic, and inside it is divided into 4 chambers, each of which has its own functionality and cleaning stage. First of all, water settles, then direct cleaning of organic waste occurs with the help of microorganisms. The last two chambers are necessary to purify water from sludge and collect it for re-processing.

TOPAS 8 is an autonomous sewage system, suitable for comfortable life in a summer cottage or in country house where no more than 8 people live. The system can be used both seasonally and year-round, depending on the user’s wishes. This is facilitated by one of the advantages of the system - quality work after a long period of non-use. The TOPAS 8 septic tank model is designed for the following plumbing equipment: the house can have two showers or one bath, two toilets, three sinks and washing machine. If the restrictions are observed, the station can serve you for up to fifty years. Keep in mind that if there is even a small but long-term excess of the volume of wastewater for a given system, then you should choose a model designed for a larger number of users.

Models of the TOPAS 8 (Pr) septic tank are used when the supply sewer pipe is located at a depth of up to 80 cm. In the case of a sewer pipe located at a depth of 80 to 140 cm, elongated models of the TOPAS 8 Long (Pr) septic tank are used. Stations without the “PR” designation are gravity-fed, i.e., purified water leaves the system by gravity. The other two models are forced, and the water is pumped out using a pump.

The TOPAS 8 station processes up to 1.5 cubic meters per day. meters of wastewater. If the power of this station is not enough to sewer your site, there are more powerful stations! We present to your attention TOPAS 10 - an autonomous station for a country cottage.

Autonomous sewage system TOPAS 8: advantages of installing a treatment plant

Installation of the TOPAS 8 septic tank is quite simple, and the wastewater treatment system itself has a number of advantages. For example, the possibility of reusing purified water and sludge formed in the system as fertilizer. TOPAS 8 sewerage works due to the vital activity of bacteria in the system. They reproduce themselves and feed on what is in the wastewater, which allows them to avoid adding new bacteria and not monitoring their number. Another advantage of the TOPAS 8 station is its compactness, and it fits into any green landscape of your site and does not spoil its appearance.

The TOPAS WWTP has two compressors that operate alternately and ensure the operation of the first and second cleaning cycles. TOPAS-S models are equipped with only one compressor, which operates continuously and supplies air through a special distribution valve. Otherwise, the design and operating principle of the TOPAS-S WWTP are the same as in the TOPAS models. This technical solution does not have a negative impact on the quality of wastewater treatment.

In Moscow and the Moscow region, delivery is carried out according to standard rules, but the goods are not transported to sales offices.
In other regions, delivery costs and terms are calculated individually.